EN / 中文

Heterogeneous Integration Era: Advanced Packaging Equipment Market, Competition and Localization Paths

by bandaotichanyeyanjiu·November 13, 2026

The semiconductor industry is at a transitional period evolving from Moore's Law physical scaling to heterogeneous integration. Against the backdrop of ultra-large AI and HPC chips breaking through reticle limits, advanced packaging has leaped to become the strategic high ground defining the core competitiveness of computing power chips.

As the physical mother machines of the industry, advanced packaging equipment are experiencing process route differentiation, a leap in per-unit value, and global landscape reconstruction. The following text systematically analyzes frontier opportunities in Thermal Compression Bonding (TCB), Hybrid Bonding, Fan-Out Panel-Level Packaging (FOPLP), Co-Packaged Optics (CPO), and Glass Substrates, re-evaluates the ecological niches of international giants, and identifies specific breakthrough paths for domestic manufacturers.

TCB Technology Route Differentiation and Major Supplier Landscape

Thermal Compression Bonding (TCB) is the cornerstone process for High Bandwidth Memory (HBM) and logic chip stacking packages. As interconnect pitches approach below 10µm and HBM stacks evolve toward 16H/20H, traditional hotplate heating is constrained by thermal expansion mismatch and warpage, driving TCB to differentiate into three major directions:

· Traditional Micro-bump TCB (NCF/NCP): Relies on non-conductive film or adhesive to fill bump gaps, limited by thermal stress warpage and underlying thermal damage, primarily targeting 25µm to 15µm pitches.

· Fluxless TCB: Introduces formic acid, forming gas, or plasma to in-situ remove solder oxide layers, eliminating residual electromigration and micro-voids, advancing pitches to 15µm to 10µm, becoming key for mass production during the HBM4/4E transition period.

· Laser-Assisted Bonding (LAB / Laser TCB): Utilizes infrared laser for instantaneous heating, reducing thermal stress by over 70%, significantly suppressing warpage and shortening bonding cycles from 10-15 seconds to under 2 seconds, suitable for 20µm to 8µm ultra-thin Chiplet placement.

The global TCB equipment market is projected to reach USD 2.80 billion by 2032 from USD 0.76 billion in 2025, with a CAGR of 20.5%. The market is highly concentrated: Hanmi Semiconductor binds with SK hynix, securing a USD 28.7 million order for TC Bonder 4.5 Griffin in 2026, monopolizing HBM-specific TCB; ASMPT relies on full coverage of C2W and C2S, with its bonding equipment business exploding by 146% in 2025, deeply penetrating TSMC and top-tier OSATs; Shibaura Machine maintains unique share in logic-to-memory placement within foundry leaders.

Hybrid Bonding: Equipment Reconstruction for Sub-Micron Interconnects

Hybrid bonding completely discards micro-bumps, embedding copper electrodes into ultra-high flatness dielectric surfaces (such as SiO₂ or SiCN). Dielectric molecular covalent bonding occurs at room temperature, followed by annealing at 200°C to 400°C to achieve solid-phase diffusion of copper atoms. This shrinks interconnect pitches to below 1µm, increasing interconnect density by two orders of magnitude compared to micro-bumps, making it the core technology for 3D DRAM, high-density logic, and CPO.

Hybrid bonding presents two evolutionary paths:

· Wafer-on-Wafer (W2W): Technically mature with high throughput, aligning and bonding two entire 300mm wafers. In 2025, it accounted for 56.0% of the equipment market (approx. USD 605 million), dominating CIS and 3D NAND manufacturing.

· Die-to-Wafer (D2W): The necessary path for stacking heterogeneous chips and known-good dies, requiring alignment accuracy of less than 100nm within millisecond-level cycles. In 2025, it accounted for 42.0%, and is expected to be the fastest-growing segment with a CAGR of 29.1% from 2026 to 2035.

The global advanced hybrid bonding equipment market is projected to increase from USD 1.080 billion in 2025 to USD 1.386 billion in 2026, reaching USD 7.589 billion by 2035 (CAGR 20.8%). Barriers to entry in the core equipment chain are extremely high:

1. Ultra-Precision CMP Equipment: Requires dielectric surface RMS roughness < 0.2nm and copper electrode micro-dishing controlled within 2 to 5nm, dominated by Applied Materials and Ebara Corporation.

2. Surface Activation and Cleaning Systems: Uses low-energy plasma bombardment to break surface bonds and adsorb hydroxyl groups, establishing industry standards via EVG and SUSS MicroTec.

3. Ultra-High Precision Bonding Main Units: Achieves sub-100nm (even <50nm) alignment in Class 1 cleanroom environments, with the Kinex platform by Besi and Applied Materials serving as the industry benchmark.

4. Defect Inspection and Metrology Equipment: Uses infrared transmission, ultrasonic microscopy, and X-ray tomography for non-destructive detection of micron-level unbonded voids, dominated by KLA and Onto Innovation.

Fan-Out Panel-Level Packaging: Area and Cost Breakthroughs in Large-Scale Packaging

When AI chip package areas exceed 1600mm², edge loss on traditional 300mm wafers becomes severe, accommodating only about 35 large chip packages per wafer. Fan-Out Panel-Level Packaging (FOPLP) shifts to rectangular panels of 510mm×515mm or 600mm×600mm, expanding carrier area by 3.7 to 5.1 times, achieving area utilization rates over 90%, and reducing unit packaging costs by 30% to 40%. The global panel-level packaging market is projected to approach USD 3 billion by 2030 from USD 160 million to USD 300 million in 2024/2025, with a CAGR exceeding 40%.

Large-size panels bring three stringent challenges to equipment:

· Chip Displacement and Warpage Control: Shrinkage during molding compound curing causes warpage and displacement, requiring placement machines with high dynamic vision compensation, along with high-uniformity lamination and molding equipment.

· Giant Panel Stepper Lithography: Traditional wafer lithography fields of view are limited, urgently requiring large-field panel stepper lithography machines or Laser Direct Imaging (LDI) equipment to avoid edge distortion at line width/space below 2µm/2µm.

· Large-Area Uniform Plating and Cleaning: Depositing micron-level redistribution layers on 600mm panels requires plating bath flow field and electric field designs ensuring overall panel thickness uniformity of less than 3%.

Equipment Value Decomposition: Dual-Engine Drive of Volume Expansion and ASP Leap

The advanced packaging equipment market size is projected to grow from USD 4.22 billion in 2026 to USD 17.06 billion in 2034 (CAGR 19.1%), driven by both shipment volume and Average Selling Price (ASP).

Regarding ASP, narrowing process tolerance windows drive equipment leaps toward nano-micro systems: Traditional die bonders cost only USD 150,000 to USD 300,000; TCB integrating vacuum chambers, reducing gases, and sub-micron optical systems rises to USD 1.5 million to USD 2.5 million; Hybrid bonding main units featuring Class 1 clean control, atomic-level activation, and sub-100nm alignment (such as Besi Kinex) see unit prices soar to USD 4 million to USD 6 million.

Regarding shipment volume, HBM stacks extending from 8H to 16H/24H double the bonding time per chip; Chiplet integration counts within single AI chips surge from 2-3 to over ten, multiplying placement operations. In the near-term 2025-2027, shipment volume expansion drives approximately 60% of growth (core driver being HBM capacity expansion); in the mid-to-long term 2028-2035, ASP increases brought by widespread adoption of hybrid bonding and glass substrates will contribute about 65% of growth momentum.

Frontier Extensions: CPO Active Placement and Glass Substrate TGV Equipment

As single-port speeds evolve toward 800G and 1.6T, Co-Packaged Optics (CPO) integrates silicon photonics engines and computing chips onto the same substrate, breaking copper interconnect attenuation limits. The core bottleneck of CPO lies in efficient coupling between single-mode fibers (mode field diameter approx. 9µm) and nanometer-scale silicon photonic waveguides. Traditional passive alignment with tolerances of 2-5µm cannot meet requirements, necessitating active alignment equipment integrated with six-axis micromotion stages: emitting light upon power-up, capturing real-time intensity extrema, and completing UV curing within seconds at 0.1µm to 0.3µm precision. ficonTEC dominates with its FL300 platform, while Besi and ASMPT are also accelerating their layouts.

Simultaneously, glass substrates, with roughness <1nm, thermal expansion coefficients matching silicon (3-8 ppm/K), and high-frequency low dielectric loss, have become core carriers solving large-chip warpage. The core process lies in Through-Glass Via (TGV) processing, with the mainstream route being Laser Induced Deep Etching (LIDE/LACE):

1. Femtosecond Laser Modification: Uses high-repetition-rate femtosecond lasers to induce phase changes in via regions, requiring extremely high pulse energy stability and high-speed scanning control.

2. Chemical Deep Etching: Corrodes modified regions using hydrofluoric acid-based solutions to achieve vias with aspect ratios of 100:1 to 500:1 without cracks.

3. Seed Layer Deposition and Plating: Deposits Ti/Cu seed layers via PVD or ALD and completes high-aspect-ratio copper filling.

4. Ultra-Precision CMP Polishing: Grinds away excess copper surface layers, exposing metal vias.

Re-evaluation of International Giants' Landscape and Bottlenecks in Upstream Core Components

Global competition in advanced packaging equipment is highly differentiated: Besi holds over 80% initial share in D2W hybrid bonding, with Q1 2026 orders surging 104.5% year-over-year to USD 313 million, building barriers through mechanical rigidity and sub-100nm algorithms; ASMPT covers TCB, laser cutting to optoelectronic placement, deeply penetrating TSMC and OSAT leaders; Shibaura Machine demonstrates advantages in precision transmission and stress compensation in high-precision logic and memory placement; K&S is accelerating its transformation from traditional wire bonders to advanced placement.

The foundation for autonomous controllability of advanced packaging equipment lies in upstream core components, with technical logic focusing on precision mechanics, thermal control, and opto-electro-mechanical coordination:

· Ultra-Precision Air Bearing Platforms: Hybrid bonding requires positioning accuracy <10nm within stroke, monopolized by Aerotech (USA) and ETEL (Switzerland).

· High-Dynamic Hot Press Heads: Require heating rates >150°C/s and temperature uniformity of ±0.5℃ at 400°C, dominated by Kyocera and NGK Insulators (Japan).

· High-Resolution Sub-Pixel Alignment Lenses: Infrared high-transmission and sub-micron resolution optical lenses are held by Navitar and Cognex.

· Ultra-Fast Laser Sources: Femtosecond sources are led by Coherent and Trumpf, while domestic players JPT Opto-Electronics and Innolaser have achieved industrial delivery capabilities.

· High-Precision Linear Encoders and Interferometers: Nanometer-level position feedback is monopolized by Renishaw (UK) and Heidenhain (Germany).

Specific Breakthrough Paths for Domestic Advanced Packaging Equipment

Domestic equipment manufacturers should abandon blanket strategies and focus on key areas with moderate process thresholds, high market elasticity, and differentiated entry points:

· Breakthrough 1: Large-Area Plating and Cleaning Equipment (Preferred Entry Point). ACM Research Shanghai, leveraging wafer-level wet deposition, pioneered plating and cleaning equipment adapted for 300mm wafers and 600mm×600mm panels. Its unique flow field design controls panel thickness uniformity to <3%, having entered advanced node packaging test lines.

· Breakthrough2: Ultra-Precision CMP Thinning and Polishing Equipment. Hybrid bonding requires surface roughness RMS <0.2nm and copper dishing <3nm. Hwatsing Technology expands laterally from front-end advantages, becoming the domestic CMP supplier closest to international top-tier standards.

· Breakthrough 3: TGV Laser Modification and Drilling Equipment. With the maturity of domestic femtosecond light sources, DR Laser has achieved full coverage for wafer and panel levels, shipping panel-level equipment first in 2026; Han's Laser and Delong Laser have also achieved commercial delivery.

· Breakthrough 4: Low-Temperature Dielectric Film Deposition Equipment (PECVD/ALD). Piotech developed low-temperature SiCN and SiO₂ deposition equipment (<200°C) for hybrid bonding, avoiding thermal damage to packages.

· Breakthrough 5: High-Precision TCB and Placement Machines. Beijing Jingyi Daxin and Piotech enter with placement machines offering 1-3µm alignment accuracy, combining domestic air bearing platforms and algorithms to evolve toward sub-micron hybrid bonding equipment.

Industry Evolution Cycle and Three-Stage Capital Allocation Rhythm

Advanced packaging equipment is deeply tied to AI infrastructure, exhibiting significant counter-cyclical growth attributes and clear evolution rhythms. Industrial and capital allocation should proceed along three targeted stages:

1. Stage One: TCB Capacity Expansion and FOPLP Pilot Period (2025–2026). Core drivers include HBM3e/HBM4 capacity expansion and cost reduction demands for large chips. Procurement focuses on fluxless TCB, panel-level plating/cleaning, and stepper lithography equipment. Performance realization certainty is highest for Hanmi Semiconductor, ASMPT, and ACM Research Shanghai.

2. Stage Two: D2W Hybrid Bonding Explosion and Glass Substrate Introduction Period (2027–2028). Logic interconnect pitches falling below 1µm push organic interposers to physical limits, leading to small-scale commercialization of glass substrates. Focus shifts to D2W sub-100nm bonders, ultra-precision CMP, TGV laser modification, and high-aspect-ratio etchers. Besi, Hwatsing Technology, and DR Laser, possessing high-precision opto-electro-mechanical integration capabilities, face revaluation.

3. Stage Three: Widespread Adoption of Memory Hybrid Bonding and Maturity of Ultra-High Density FOPLP (2029–2035). HBM5 and ultra-high-layer 3D DRAM fully adopt hybrid bonding, with ultra-high density panel-level packaging and glass substrates becoming standard for supercomputers. The market turns to automated line integration, CPO active alignment in-situ testing, and ultra-high density metrology systems. Platform-type equipment leaders that complete technological accumulation and achieve localization will establish long-term excess returns.

Conclusion

The semiconductor industry is progressing irreversibly from physical scale miniaturization toward system-level heterogeneous integration. From the refined evolution of micro-bump TCB, to the disruptive reshaping of manufacturing boundaries by sub-micron Hybrid Bonding, to the dimensional expansion of carrier forms via FOPLP and TGV Glass Substrates, advanced packaging equipment has transformed from a supporting role in traditional back-end packaging/testing to a core pillar driving the evolution of AI and high-performance computing power.

In this cycle of rising per-unit value and market scale expansion, narrowing nano-micro process tolerance windows make high-rigidity mechanical motion, ultra-clean environment control, and sub-micron opto-electro-mechanical coordination the decisive barriers to victory. For domestic equipment manufacturers, blind follow-through with blanket strategies cannot shake the deep accumulation of international giants in cutting-edge bonding main units. Only by maintaining strategic resolve, closely adhering to high-elasticity process entry points such as large-area plating/cleaning, bonding/polishing CMP, TGV laser modification, and low-temperature thin film deposition, while simultaneously promoting self-supply of underlying core components like ultra-precision air bearing platforms, high-dynamic hot press heads, and nano-level sensing encoders, can they truly build autonomous and controllable technical moats and ecosystem competitiveness amidst the drastic reconstruction of the global advanced packaging supply chain.