EN / 中文

Electronica 2026: Europe, a Slow-Burning Fertile Market for Chinese Chip Exports

by bandaotichanyezongheng·November 16, 2026

Author: Peng Cheng

Recently, data released by China's General Administration of Customs pushed the momentum of China's semiconductor exports to a new high: In October, China exported USD 39.594 billion worth of integrated circuits, a year-on-year increase of 137.1%. In the first three quarters of 2026, China's IC exports grew by 99.1%, computer accessories grew by 2.1 times, and storage components such as solid-state drives (SSDs) grew by 1.3 times. In the first half of this year, integrated circuits had already surpassed automatic data processing equipment to become China's largest export category. So, which markets are buying Chinese semiconductor products? And under what identity are they being sold?

We found the answers in Munich, Germany. The biennial electronica2026, the International Trade Fair for Electronics, was held at the New Munich Trade Fair Centre. Approximately 3,600 companies exhibited at this edition. The scale of participation from mainland China is now approaching that of Germany, and the total number of exhibitors from Greater China (including mainland, Taiwan, and Hong Kong) ranks among the top globally, reflecting the vitality of the domestic electronics supply chain and its push into overseas markets.

01Europe Demands Industrial and Automotive Solutions

Where are the opportunities and markets for Chinese companies going global in Europe? Staff from SG Micro noted that supply chain tensions over the past two years have led many European customers to proactively seek out Chinese firms. "The first step is definitely direct substitution, but once cooperation builds trust, things will gradually change."

The demand structure of the European market differs from that of China. Unlike the rapid growth driven by consumer electronics and new energy vehicles (NEVs) in China—characterized by fast iteration and intense price competition—the European market is centered on automotive electronics, industrial automation, and photovoltaic energy storage. The lifecycle of automotive-grade and industrial-grade products often spans ten years with substantial profit margins, but certification barriers are high and customer decision-making is conservative. Industry and automotive are the two pillars of European semiconductor demand; this structure dictates what products Chinese manufacturers should bring. However, behind high profits lie stringent entry barriers. Certifications such as AEC-Q100 for automotive, industrial reliability standards, and functional safety ISO 26262 act both as hurdles and as moats for qualified suppliers.

Automotive is the most valuable yet hardest segment to crack. Although the pace of electrification transition among European local automakers is slow, the installed base is massive. According to reports, Novosense's automotive chips have entered mass production and supply Tier 1s like Bosch and Continental AG. Its isolation drivers are used in main drive inverters to directly drive SiC MOSFETs. GigaDevice's automotive Flash has entered the systems of Bosch and Continental AG, with chips being gradually introduced into vehicle platforms of Renault, BMW, and Mercedes-Benz. Longsys has accumulated experience with over 20 automotive brands and more than 60 Tier 1 suppliers for its automotive-grade storage, having passed AEC-Q100 Grade 2 certification. BIWIN Storage Technology's automotive-grade storage products are widely adapted for key systems including smart cockpits, autonomous driving, V2X, domain controllers, navigation, and onboard monitoring. Based on product certification and introduction experience in the domestic market, automotive-grade products have become the key for domestic semiconductors to enter Europe.

Industrial applications are the main volume driver for Chinese manufacturers. As the birthplace of global industrial control, Europe sees strong demand for industrial control, robotics, edge AI, and medical electronics. GigaDevice's MCUs focus on industrial control and motion control. According to staff, their European home appliance and industrial customers include brands such as BSH (Bosch Siemens Home Appliances), De'Longhi, and Nespresso. Novosense's industrial business has entered the joint venture systems of Siemens, ABB, and Schneider Electric in China, and its European team is attempting to win over these giants' European headquarters. Longsys has been shipping industrial-grade wide-temperature mSSDs and embedded storage to Europe for years. SG Micro enters the substitution market through breadth of SKUs, showcasing over 7,200 products across 38 categories on display boards, covering signal chains, power management, sensors, and storage. The landing point of AI also returns to industry: Europe lacks large-scale data centers and enforces strict data sovereignty. Longsys's AI SSDs and AI DIMMs, along with its "Edge LLM Inference Box," precisely meet edge AI deployment needs. At GigaDevice's booth, six-axis robotic arms and agile hands from YINSHI Robot showcased MCU solutions for robotics scenarios directly to European factories.

02Europe's Barrier is Certification; America's is Origin

There are differences between the Chinese and European markets. Regarding customer segmentation, the European market ranges from large Tier 1s and industrial giants to small and medium-sized industrial customers, with entry difficulty decreasing progressively. Leading automakers and industrial control giants have long integration cycles, while small and medium-sized industrial customers are relatively flexible. In customer procurement decisions, certification and supply stability often take priority over simple low prices, followed by technology, local service, and price. It is reported that automotive certifications generally take one to two years, and further validation by Tier 1s and OEMs takes another one to two years, meaning "actual mass production may only happen after two or three years." GigaDevice also stated that every SKU targeting the European market is released only after certifications and documentation are complete, with the overall cycle typically taking one to two years. The flip side of long cycles is the longevity of the business: The lifecycle of European industrial and automotive customers generally spans ten years. Once a supplier is qualified, the business becomes "long-lasting." Therefore, European customers often prioritize long-term supply capability over price.

What truly changes the speed of entry is the memory of chip shortages. Staff universally mentioned that in recent years, due to global chip shortages, certification processes have noticeably accelerated when customers face material shortages. "It used to be slow; now it's fast." European companies are generally seeking diversified supply chains, giving Chinese enterprises an opportunity to enter the European market. A representative from Novosense stated, "European customers now generally hope for supply chain diversification and are looking for second sources. This opens a window for Chinese manufacturers, but it does not mean the substitution process will be instantaneous."

However, although the United States and Europe are both developed markets, their barrier structures are completely different. It is reported that US customers require manufacturing locations, potentially demanding both front-end and back-end processes be located offshore. A comparison from Novosense staff was more direct: "Due to US-China competition restrictions, the US is tighter, while Europe is relatively more open." SG Micro confirmed that European customers do not require overseas production lines. Longsys feels that European industrial customers can proceed once compliance certifications are passed, whereas "North America might actually impose more requirements on Chinese enterprises." The EU itself is anxious about chips. The "Chips Act" proposed increasing Europe's share of global chip production to 20% by 2030, and the "Chips Act 2.0" plans to raise EUR 120 billion for local manufacturing. However, these measures target manufacturing reshoring rather than closing off procurement. Companies generally state that European customers have not tightened purchases of Chinese chips because of this. This means that for Chinese enterprises, the issue in the US is "whether we can enter," while in Europe it becomes "how quickly we can enter." For Chinese semiconductors, Europe is currently one of the few developed markets still willing to offer market opportunities.

03Staying Through Localized Service

So, how should Chinese companies enter the European market? Among the visited companies, almost all manufacturers keep their R&D teams in China. Their European subsidiaries primarily consist of local sales teams and FAE technical support, rarely choosing to build factories or use contract manufacturing in Europe. The reason is that building factories in Europe involves heavy assets, with high labor and manufacturing costs; contract manufacturing is also more expensive. At the current stage, market volume is insufficient to support large-scale manufacturing. Most chips are produced and manufactured domestically for export, with only testing and certification completed in Europe. It is understood that SG Micro has a subsidiary in Germany and has been a regular participant at the Munich electronica fair for over a decade. Novosense established a branch in Munich with a European team of over ten people. GigaDevice's European team consists of twenty to thirty people stationed locally, with subsidiaries in both Germany and the UK. The European entities of all three companies focus mainly on business operations rather than R&D, constituting the standard model for Chinese chip companies entering Europe.

Among storage companies, BIWIN Storage Technology operates purely on exports, participating as a domestic company without a subsidiary in Europe so far. Early exhibitions in Europe focused on embedded products; this time in Munich, they highlighted enterprise DDR5 RDIMMs and 122.88TB QLC enterprise SSDs. Longsys took the M&A path: In 2017, it acquired Micron's storage brand Lexar, taking over the European team. Its European headquarters is set up in the Netherlands, absorbing former Micron personnel. The brand covers over 70 countries, leveraging Lexar's channels to reach small B2B customers. Its exhibition boards show Lexar, FORESEE, and Zilia brands displayed together. Self-developed storage controllers have cumulatively shipped over 280 million units, and self-developed NAND flash exceeds 200 million units. Packaging and testing capacity is distributed across Zhongshan, Suzhou, and a South American manufacturing center. When customers do not accept "Made in China," they can offer "Made in Brazil."

How to stay once you've entered? SG Micro staff frankly admitted that price is one advantage, but service is the key. The company has FAE and sales teams in Europe. In his words, trying to find local European suppliers during Christmas is "impossible." Novosense staff summarized the flexibility more specifically: Large European companies evaluate ROI before customization, whereas Chinese manufacturers have simpler decision-making processes. "Creating one success case can influence more customers." Longsys printed "localized service, stable supply for over 8 years, and 7×24 on-site support" in the most prominent position on its display boards. Supporting this is the mass production ramp-up capability honed in the Chinese market. Although GigaDevice is fabless, it has deep ties with domestic foundry capacities. Its NOR Flash ranks second globally with a market share of approximately 20%; the share itself provides supply chain security. Conversely, the moat for European local vendors lies in their ecosystem. MCU software tools have accumulated over many years, and industrial customers lack strong incentives to redesign boards unless necessary. Domestic companies, however, not only respond promptly to customer needs but also support many customized requirements from European clients—requirements that large local firms often refuse because they are difficult to scale.

04Europe is a Slow-Burning Fertile Ground

Overall, domestic semiconductors still hold a relatively low share in the overall European market. Most companies are in the initial stage, but growth rates are fast. "Once listed as a qualified supplier, the project lifecycle is long, and returns are long-term, but the upfront investment is huge." Opportunities come from the wave of supply chain diversification, while challenges stem from gaps in ecosystem, brand recognition, and historical data accumulation. Going global to Europe is not simply selling mature domestic products abroad; it requires adapting to a completely different customer logic, standards system, and commercial rules. For many Chinese semiconductor companies, Munich is just the starting point. The real competition lies in the lengthy certification, testing, and project verification processes after the exhibition ends.

At electronica 2026, Chinese exhibitors appeared collectively, marking a new phase in the globalization of Chinese semiconductors. Europe is not a market that can be swept aside simply by low prices. Here, certification, historical data, long-term supply, and local service are valued. For Chinese companies, the European market is more like a "slow-burning fertile ground": High upfront investment and long cycles, but once Design-In is achieved, it yields long-cycle stable returns. For Chinese semiconductors, barriers in the US market are rising, growth in Asia-Pacific markets is peaking, and Europe is likely to become the next important market for Chinese semiconductor exports. This gathering of Chinese companies in Munich comes at exactly the right time.