EN / 中文

UGREEN P5 Magnetic Power Bank Teardown: 2026 New GB Standard, Built-in Cable & 22.5W Fast Charge

by chongdiantouwang·November 17, 2026

With the implementation of the 2026 new national standard, UGREEN, one of the core drafting units for the new power bank standard, has taken the lead in comprehensively upgrading its power bank product line, launching the UGREEN Super Charge P5 magnetic power bank with a built-in cable, which has obtained the 3C certification for the 2026 new national standard.

This product cleverly combines magnetic attachment with wired fast charging. The body contains 16 N52H strong magnets, allowing it to securely attach to the back of an iPhone, while also supporting wired fast charging via a built-in USB-C cable, solving the pain point of forgetting cables when going out.

UGREEN's new product is equipped with a built-in USB-C cable and two ports (1A1C), supporting 22.5W fast charging and simultaneous output from three ports. It also features an intelligent digital display screen on the side to show remaining battery capacity in real time.

In terms of cells, it uses 10,000mAh cells that have passed nail penetration tests, ensuring daily electrical safety.

The product also features intelligent interaction functions compliant with the 2026 new national standard specifications. Without needing a computer, users can directly connect to the UGREEN Smart Connect APP via smartphone to view real-time power, temperature, battery health, cycle count, and underlying cell traceability codes on a single screen.

It is understood that this UGREEN power bank integrates the ZR SW6236H highly integrated power bank SoC. A single chip enables charge/discharge conversion, protocol control, and driving of the 188-segment digital tube.

Product Appearance

The packaging box features a minimalist pure white background design, with the UGREEN brand logo, four core selling points, and a rendering of the exterior printed on the front.

The back of the packaging box displays the product parameter specification table.

Upon opening the package and removing all items, besides the UGREEN built-in cable new national standard power bank itself, it includes a user manual, after-sales service policy warranty card, and safety warning card.

This UGREEN power bank uses a V0-grade flame-retardant PC material shell. The entire body features a warm cream-white color scheme, with a fine matte finish that feels skin-friendly and resists fingerprints. The edges and corners are smoothly rounded. The braided fast-charging cable attached to the top can be secured with a cable organizer clip, transforming into a portable lanyard.

The back of the device features a clean and concise design, with the UGREEN brand logo centered at the top and a racetrack-shaped magnetic alignment indicator printed below.

The upper right corner of the front face displays the UGREEN brand logo, while the lower left corner shows the rated energy and maximum output power markings, indicating compliance with CAAC carry-on standards.

A racetrack-shaped digital display screen is located at the top end of one side of the device, surrounded by a bright silver metallic decorative ring, enhancing the overall refinement of the unit.

When the digital display screen is lit, the hidden 188-segment digital tube inside clearly shows the current remaining battery percentage.

The top area of the device is configured with a built-in USB-C cable and two ports (1A1C).

The built-in bidirectional USB-C fast-charging cable is crafted using high-density braiding technology, making it tough and wear-resistant. The front of the cable organizer clip features a black glossy decorative panel printed with the UGREEN brand logo.

The built-in cable is 18cm long. The USB-C terminal features a white housing made via integral injection molding, with markings indicating that the cable supports bidirectional fast charging input and output.

A power button matching the shell color is located on the right side of another edge of the device, while detailed product parameters are laser-engraved on the left area.

Close-up of the nameplate parameters on the side of the device:

Product Name: Power Bank

Model: PB581

P/N: 75061

USB-C Cable (IN 1)/USB-C (IN 2) Input: 5V3A 9V2.22A

USB-C Cable (OUT 1)/USB-C (OUT 2) Output: 10V2.25A 5V2.4A 9V2.22A 12V1.67A

USB-A (OUT 3) Output: 10V2.25A 5V2.4A 9V2A 12V1.5A

Total Output: 5V3A

Rated Energy: 37Wh (3.7V)

Recommended Safe Service Life: 5 Years

Manufacturer: Dongguan Chuangming Fuxing Electronic Technology Co., Ltd.

Maker: Shenzhen UGREEN Technology Co., Ltd.

Date of Manufacture: 2026-10-10

SN/Code: CMFXDEGAA-D701126853EVE1

Standards: GB47372-2026; GB 4943.1-2022; GB 31241-2022

The bottom of the device bears the 3C certification mark.

Attaching the product to the back of an iPhone demonstrates that it does not obstruct camera shooting.

Holding the power bank with fingers allows lifting the iPhone steadily, demonstrating strong magnetic force.

Product Dimensions and Weight

Measured with calipers, the length of the power bank body is 113.46mm.

The measured width of the power bank body is 71.69mm.

The measured thickness of the power bank body is 19.39mm.

Placing the power bank on an electronic scale, the total weight is measured at approximately 224.0g.

Placing the power bank in an adult male's palm, the size comparison is as shown.

Product Fast Charging Protocol Test

Using the POWER-Z KM003C, the built-in USB-C cable was found to support mainstream fast charging protocols including QC3+, FCP, SCP, AFC, PD3.0, PPS, QC4+, DCP, and Apple 2.4A, offering comprehensive protocol coverage.

Reading the PDO messages of the built-in USB-C cable, it supports 20W PD3.0 fast charging, featuring three fixed voltage tiers: 5V2.4A, 9V2.22A, and 12V1.67A, along with one PPS voltage tier of 5.00-11.00V 2.00A.

The independent USB-C port was also tested to support QC3+, FCP, SCP, AFC, PD3.0, PPS, QC4+, DCP, and Apple 2.4A charging protocols.

The PDO messages for the USB-C port are identical to those of the built-in cable, featuring the same three fixed voltage tiers (5V2.4A, 9V2.22A, 12V1.67A) and one PPS voltage tier (5.00-11.00V 2.00A).

Finally, the USB-A port was tested to support QC3+, FCP, SCP, AFC, DCP, and Apple 2.4A charging protocols.

Product APP Interaction

Connecting the product to a smartphone via a data cable allows real-time viewing of product information in the UGREEN Smart Connect APP.

This UGREEN power bank does not require a computer. By directly connecting the power bank to a smartphone via a data cable and opening the UGREEN Smart Connect APP, users can intuitively view the current battery percentage, estimated usage time, real-time cell temperature, current total input/output power, and other statuses on the main page.

Clicking into the battery information page allows users to view detailed operational data such as current battery health, number of cells in series/parallel, battery cycle count, real-time battery current, battery voltage, rated power, cumulative discharge time, and cumulative discharge amount.

Continuing to click into the cell information page reveals detailed cell information.

Product Teardown

Entering the teardown phase, prying open the clips around the perimeter along the shell seam removes the back cover. The inner side of the back cover has a large black heat insulation pad attached. The magnetic area uses U-shaped double-sided tape for auxiliary fixation, hiding a magnet array inside for MagSafe attachment functionality.

The interior of the shell adopts a classic layout with the PCBA on the left and cells on the right. The left-side dual-layer blue PCBA module is secured to the shell posts with screws. The right-side pouch cell edges are wrapped with green insulating paper for protection. An NTC thermistor is fixed to the cell tab side with yellow high-temperature tape for temperature monitoring.

Unscrewing the fixing screws, unplugging the built-in cable connector and the digital display flex cable, the PCBA module and cell assembly are removed entirely from the bottom shell.

Close-up of the inside of the built-in cable outlet at the top of the shell.

The hidden LED digital display screen on the side is fixed within a white plastic bracket and connected to the PCBA via an FPC flex cable.

A black cushioning foam tape is pasted in the center of the back of the cell. The nickel tabs of the cell positive and negative poles are connected to the PCBA module.

Separating the cell from the PCBA module, the built-in cell is from EVE Energy, model 126280GS3, with a nominal voltage of 3.7V, rated capacity of 10,000mAh, and rated energy of 37.0Wh.

Due to limited internal space, the PCBA module adopts a stacked architecture of upper and lower small boards. The upper layer is the BMS board, and the lower layer is the main control board. The two small boards are connected via pin headers.

Separating the upper and lower PCB layers.

On the front of the lower main control board, the left side features a USB-C female socket, a digital display FPC connector, and an alloy inductor. The middle section houses the ZR SW6236H power bank main control SoC and the 5-pin connector slot for the built-in cable. The right side includes a USB-A female socket, VBUS switch transistors, and the power button.

The back of the main control board features an MCU chip used for intelligent data interaction on the left side.

The upper BMS board features a Puya MCU chip, lithium battery protection IC, and lithium battery protection MOSFETs. An NTC thermistor is soldered to the center bottom of the small board for detecting battery pack temperature.

After removing the gray thermal pad, observing the back of the upper BMS board reveals no components.

The built-in iCM CM1003-BLS is a highly integrated protection chip designed specifically for single-cell lithium-ion/lithium-polymer rechargeable batteries, housed in a SOT23-6 package.

This chip incorporates high-precision voltage detection and delay circuits, fully realizing comprehensive protection against overcharge, over-discharge, over-current during charge/discharge, and load short-circuiting. It requires no external delay capacitors, effectively simplifying peripheral circuit design and ensuring cell safety.

The CM1003-BLS exhibits ultra-low power consumption, with a typical operating current of only 1.5 μA and sleep current below 50 nA, reducing battery standby loss.

The chip also integrates charger and load detection functions, supporting automatic recovery after disconnection due to discharge over-current, and features a "prohibit charging 0V battery" safety mechanism. It is highly suitable for power protection circuits in various single-cell lithium battery portable digital and wearable devices.

A lithium battery protection MOSFET marked "3312M".

Another lithium battery protection MOSFET is from AGMSEMI, model AGM303AP, an NMOS with 30V breakdown voltage and 2.8mΩ on-resistance, in a PDFN3.3×3.3 package.

The ZR SW6236H is a highly integrated A+A+C+C four-port multi-protocol power bank SoC chip, housed in a QFN-52 package.

The chip integrates efficient switching charging and synchronous boost, providing up to 4.5A constant current/constant voltage charging and 22.5W synchronous boost output. It widely supports 4.2V~4.5V ternary lithium batteries and 3.6V/3.65V LFP batteries, with standby power consumption below 40μA at 3.7V supply.

The SW6236H supports multiple protocols including USB PD3.1/PPS, SCP, FCP, QC3.0/QC2.0, AFC, PE, and BC1.2.

The chip supports flexible wireless charging modes and low-current discharge modes for wearable devices. It also features rich hardware pin configuration functions and supports short press, double click, long press interactions, and system reset, significantly simplifying system development difficulty.

The chip internally integrates a high-precision coulomb counter and 12-bit ADC, enabling precise calculation of remaining battery capacity. It supports 5-PIN 188-segment digital tubes, wireless charging digital tubes, or 3-5 LED screens, equipped with fast charging indicators and anomaly alerts.

The VBUS switch transistor for USB-C port output control is from Ruichips Semiconductor, model RU8205C6, a dual NMOS with 20V breakdown voltage and 18mΩ on-resistance, in a SOT23-6 package.

The second VBUS switch transistor for the built-in USB-C cable also uses the Ruichips Semiconductor RU8205C6.

The third VBUS switch transistor next to the USB-A female socket is also the Ruichips Semiconductor RU8205C6.

Close-up of a 2.2μH alloy inductor.

The MCU on the back of the main control board is from WCH Electronics, actual model CH32L103F8U6.

This low-power MCU based on the QingKe RISC-V kernel supports USB communication, BMS data interaction, and status monitoring functions. It uses a QFN20 package and implements intelligent interaction with the UGREEN Smart Connect APP on smartphones.

The other MCU on the front of the BMS board is from Puya Semiconductor, the PY32F002B series, based on a 32-bit ARM Cortex-M0+ kernel, using a QFN20 package. It handles underlying battery pack data collection, abnormal record storage, and overall logic coordination control.

An NTC thermistor used for detecting battery pack temperature.

Teardown complete. Here is a group photo of all components.

Chongdiantou Summary

Finally, here is the bill of materials (BOM) for the product for easy reference.

This UGREEN power bank features built-in magnetic functionality, attaching directly to the back of a phone, while also supporting wired fast charging with a maximum output of 22.5W, meeting the daily charging needs of Apple phone users.

As a power bank compliant with the new national standard, it supports direct connection to the UGREEN Smart Connect APP via smartphone, allowing real-time viewing of product information with all statuses clearly visible.

Through teardown analysis, Chongdiantou learned that the product internally uses a dual-layer PCB stacked design. The cell is an EVE Energy10,000mAh cell, protected by the iCM CM1003-BLS and two lithium battery protection MOSFETs.

Simultaneously, the product integrates the ZR SW6236H multi-protocol power bank SoC responsible for charge/discharge conversion and protocol control. All three output ports are independently equipped with Ruichips Semiconductor RU8205C6 VBUS switch transistors.

Additionally, the combination of the WCH CH32L103F8U6 and Puya PY32F002B series dual MCUs constitutes the intelligent interaction, monitoring, and multi-layer protection compliant with the 2026 new national standard specifications.

The teardown reveals a compact internal structure and solid component selection, making it highly suitable for iPhone users.