Company Profile
Shandong Micro-Sensor Photonics Co., Ltd. (referred to as "SMSP") is a national high-tech enterprise. The company focuses on the R&D and production of laser sensors, fiber optic sensors, and industrial safety IoT systems. Its main products include laser gas sensing, distributed fiber optic sensing, and fiber Bragg grating sensing solutions, which are widely applied in safety monitoring scenarios such as smart mines, urban lifelines, and long-distance pipelines. The company has led or participated in multiple National High-Tech Research and Development Program (863 Program) projects and key national R&D initiatives. It holds over40 patents and is recognized as a national-level "Little Giant" enterprise specializing in new and advanced technologies.
Editor's Note
In the depths of mines, hidden dangers like gas lurk everywhere. Traditional gas sensors can detect these hazards but are prone to failure due to "poisoning." In this episode of Chip Secrets: Experts Talk Chips, we speak with Li Jianfei, Deputy General Manager of SMSP. His team took a different approach by adopting laser gas detection technology, overcoming the limitations of chemical sensing consumption. Additionally, they developed distributed fiber optic sensing solutions, enabling continuous long-distance monitoring over several kilometers using just a single optical cable. Why is laser sensing immune to poisoning? How does an optical cable achieve "full coverage with one line"? And how can gas resources be turned into value? This episode reveals the answers.
*The following is a transcript of the podcast, confirmed and authorized by the guest.
The "Electronic Nose" Underground:How Does Gas Monitoring Avoid Sensor Poisoning?
Huanshi: Today, let's first imagine a scenario: deep within mine tunnels hundreds of meters underground, a "silent killer" lurks—gas (methane). It is colorless and odorless, but when it accumulates to critical concentrations, even a tiny spark can trigger an explosion. Besides this, there is another invisible hazardous gas—carbon monoxide—which is also colorless and odorless, making it difficult for humans to detect prematurely. The guest today represents a company that has equipped mines with a "nose" and "nerves": Shandong Micro-Sensor Photonics Co., Ltd. Located in Jinan, this distinctive Sino-British joint venture specializes in safety sensing products for special high-risk scenarios. Our guest is Li Jianfei, Deputy General Manager responsible for marketing and sales management, who has been deeply involved in this industry for over two decades. We are honored to have Mr. Li join us on Chip Secrets. Please tell our listeners about your company and its focus on safety sensing products for high-risk environments.
Li Jianfei: Yes, coal mining is a high-risk industry, and safe production in coal mines has always been a priority for the state. Before approximately 2016, gas was the primary cause of accidents in coal mine production.
Huanshi: Correct. At that time, we frequently heard news reports about coal mine gas explosions, trapped personnel underground, and difficulties in rescue operations.
Li Jianfei: At that time, more than 65% of accidents in the coal mining sector were gas explosions. However, starting in 2016, the safety monitoring systems in coal mines underwent upgrades, and the industry proposed adopting laser solutions for gas monitoring. Prior to this, traditional monitoring methods relied on electrochemical monitoring. Statistical data from 2018 and 2019 showed that after this reform, roof collapse accidents accounted for the largest proportion of coal mine accidents, while coal and gas accidents dropped to around 30%. This upgrade effectively reduced the incidence of gas accidents in coal mines. The core component of this solution is the laser methane sensor. Major manufacturers of complete coal mine safety monitoring systems are our cooperating customers. Simply put, we are primarily an enterprise dedicated to R&D of laser gas sensors.
Electrochemical probe / Electrochemical gas sensor: A sensor that relies on redox electrochemical reactions occurring on the electrode surface upon contact with gas, outputting an electrical signal proportional to the concentration.
Roof collapse accident: An underground accident where the rock layer of the tunnel roof collapses or spalls due to factors such as mining pressure, geology, and support conditions, causing damage to personnel, equipment, and production.
Huanshi: The data you just shared commands my respect. Relying on your product capabilities, you have fortified the life safety defense line in this traditional industry. I believe this is excellent proof that technology changes the world.
I would like to ask you: You mentioned earlier that the traditional method for monitoring gas differs from your laser monitoring solution. Could you explain in detail what previous solutions were used? How significant is the difference between them and laser monitoring? What improvements has the laser solution brought in terms of monitoring accuracy and long-term stability?
Li Jianfei: The major contribution we have made to this industry is a technological upgrade and iteration. Before we entered this field, the primary means of monitoring gas in coal mines was catalytic combustion sensors. Companies pursuing higher performance might use infrared probes for monitoring.
These electrochemical probes have a relatively short service life and require frequent calibration, typically every ten-plus days.
Huanshi: What do you mean by "calibration"?
Li Jianfei: Calibration refers to the process where, since the detection principle for gas (methane) relies on electrochemical reactions, the sensing probe contains internal chemical reagents. As the probe is used continuously for over ten days, these reagents gradually volatilize, causing the monitoring results to become inaccurate—essentially rendering the probe ineffective.
Huanshi: So the concentration of chemical reagents on the probe decreases.
Li Jianfei: Exactly. In the industry, this is professionally referred to as the probe being "poisoned." At this point, the probe must be recalibrated, which is why regular adjustment is necessary.
However, the laser solution does not suffer from this issue. It operates based on the principle of spectral absorption. As long as the laser stably outputs a beam at a specific wavelength, methane monitoring can be completed. Therefore, laser technology represents a significant leap forward in gas monitoring.
TDLAS Laser Methane Detection (Spectral Absorption Principle): Tunable Diode Laser Absorption Spectroscopy technology utilizes the fact that methane molecules absorb only specific wavelengths of laser light (molecular fingerprint absorption). Gas concentration is calculated according to the Lambert-Beer Law, with no consumable chemical reagents.
Huanshi: This is an entirely different testing methodology.
Li Jianfei: Yes. The underground environment is harsh, with high humidity and heavy dust. Moreover, awareness among coal miners varies, leading to extended intervals for safety equipment calibration and replacement. This creates risks: gas monitoring devices may fail without timely replacement. Using lasers for gas monitoring eliminates these problems.
Huanshi: What is the service life of a laser sensor?
Li Jianfei: Generally3 to 5 years. We have probes that have been used underground for over 10 years.
Huanshi: So replacement is needed within this cycle.
Li Jianfei: Yes, but in reality, a laser gas sensor we deployed at Dongtan Coal Mine has operated continuously for nearly 20 years without issues because it was well-protected against impacts and drops. Thus, the actual service life of laser sensors can be very long.
Huanshi: Besides gas testing, do laser sensors have other application scenarios? Have you explored other fields?
Li Jianfei: Yes. Apart from monitoring gas, we have developed laser monitoring solutions compatible with multiple types of gases. Leaks of ethane, carbon monoxide, carbon dioxide, oxygen, ethylene, acetylene, and others can all be monitored using laser technology.
Huanshi: What level of leakage can your system detect?
Li Jianfei: Detection thresholds are set according to industry standards. For example, gases like oxygen and methane are measured in percentages; trace gases like ethylene, ethane, and carbon monoxide can be detected at ppm levels, ensuring even minor leaks are identified.
Huanshi: This provides ample warning and evacuation time at work sites.
Optical Cables as Distributed Nerves:How Are Hazards Along Long-Distance Pipelines Continuously Captured?
Huanshi: Please continue discussing the applications of laser sensors in other scenarios.
Li Jianfei: Beyond gas monitoring, we initially entered the power monitoring field using fiber Bragg grating temperature sensors, which incorporate DTS (Distributed Temperature Sensing) technology. In this setup, a laid optical cable serves both transmission and monitoring functions, detecting temperature changes along the entire route. Data transmitted to the system allows us to pinpoint overheated joints or fire risks anywhere along the cable.
DTS Distributed Temperature Sensing, Raman Scattering: Distributed Fiber Optic Temperature Sensing (DTS) systems rely on the Raman scattering effect in optical fibers. The same cable transmits signals and acts as a sensor, continuously measuring temperature and locating hotspots along its length.
Huanshi: What is the monitoring principle? How is temperature controlled?
Li Jianfei: It relies on the optical principle of Raman scattering.
Huanshi: This is a different technical path compared to laser gas sensing.
Li Jianfei: Correct. They are two independent technical paths.
Huanshi: How many main product lines do you currently have?
Li Jianfei: We categorize our products into three types. First, laser gas monitoring products; second, products based on distributed fiber optic technology, which enable not only temperature measurement but also distributed vibration monitoring and distributed acoustic monitoring; third, fiber Bragg grating sensor series.
Distributed Vibration Sensing (DVS), Distributed Acoustic Sensing (DAS): Distributed fiber optic vibration/acoustic sensing relies on Rayleigh backscattering in optical fibers to continuously perceive vibration and acoustic signals along the cable. It is suitable for intrusion and leak monitoring in long-distance pipelines and cables, with spatial resolution reaching meter-level precision.
Fiber Bragg Grating (FBG) Sensors: Optical fiber Bragg gratings belong to quasi-distributed fiber optic sensing. The grating wavelength shifts with temperature and strain, allowing precise monitoring of deformation and temperature. They are commonly used for roof, surrounding rock, and structural disaster monitoring.
Huanshi: You emphasized "distributed" vibration. Why add the prefix "distributed"? Does this correspond to monitoring needs requiring distributed characteristics in certain scenarios?
Li Jianfei: Yes. The definition of "distributed" targets large-area, long-distance continuous monitoring scenarios. Sometimes the area to be monitored is vast, making it impractical to deploy individual point sensors one by one. In such cases, monitoring can be achieved by laying a single continuous optical cable.
Huanshi: So for this type of regional monitoring, there is essentially a test point at regular intervals to achieve the monitoring goal.
Li Jianfei: You can think of it as one optical cable, ranging from 1,000 meters, 2,000 meters, or even 10 kilometers in length, effectively deploying a sensor every meter along the cable.
Huanshi: What kinds of scenarios does this solution fit? Municipal pipelines? Or integrated pipe networks?
Li Jianfei: You are quick to grasp the concept; your examples are indeed included in our applicable scenarios. For instance, high-voltage cables, long-distance oil pipelines, natural gas pipelines, and water pipelines—all these scenarios can be monitored for leaks using this solution.
Huanshi: Our municipal pipe networks have become so intelligent nowadays.
Li Jianfei: Yes, but this technology has not yet been fully popularized. We hope to accelerate its implementation, identifying pipeline leak risks early to prevent secondary disasters, similar to disaster prevention in coal mines.
Huanshi: Moreover, leaks themselves imply resource waste. Timely repairs can save significant losses. Do cities in China currently have sufficient awareness regarding early warning of pipeline leaks and preventing safety accidents? How is the progress of promoting this technology?
Li Jianfei: Many cities possess this awareness. We have undertaken numerous national key R&D projects, including early 863 Program initiatives. Simultaneously, we have implemented multiple cooperative projects with entities such as Sinopec, PipeChina, and CNPC, accumulating many successful case studies.
Huanshi: After all, you have been deeply engaged in this track for many years.
Li Jianfei: Yes, this is our foundational business.
Turning Gas from Hazard to Resource:How Does Precision Sensing Help Enterprises Increase Revenue?
Huanshi: There is much discussion about whether methane, as a greenhouse gas, can be converted into an important clean energy source through carbon capture. In your interactions with clients, have they raised new demands regarding gas monitoring or utilization?
Li Jianfei: Yes. In coal mining regions, there are many high-gas mines. To extract coal, the internal gas must be drained. Direct discharge into the atmosphere causes environmental pollution. Therefore, we drain the gas via pipelines and then use it for power generation, achieving energy reuse. During this process, our sensors measure the concentration and volume of gas within the pipelines.
Because the collected gas may be sold externally, it is now considered a usable energy resource rather than a hazardous gas requiring disposal.
Huanshi: With accurate values, enterprises can decide whether to convert it into a byproduct.
Li Jianfei: Yes. Essentially, we help them measure the specific concentration, facilitating pricing decisions based on that data.
Huanshi: This offers enterprises a new possibility for revenue generation.
Li Jianfei: Correct. Additionally, agricultural universities and various research institutions collaborate with us, primarily using our sensors to monitor methane concentrations and carbon monoxide emissions in greenhouses. Regarding the environmental monitoring applications you mentioned, adoption has not been widespread; only a few units have approached us for cooperation.
Huanshi: Is the monitoring of carbon monoxide in greenhouses for cultivation needs or safety considerations?
Li Jianfei: Both. For example, some agricultural plantations use sensors to regulate air composition within greenhouses. In breeding scenarios, such as cattle and pig farming, livestock metabolism produces methane, requiring sensors to monitor these concentrations.
Huanshi: Relying on sensors, they can mitigate risks in sealed breeding environments. Besides the two gases mentioned, do you have other directions for gas sensing and monitoring?
Li Jianfei: We can also monitor ethane, oxygen, carbon dioxide, ethylene, and other gases. To date, most developed gas sensing solutions target coal mine fire scenarios. In the future, we plan to continue tackling challenges in sensing and monitoring chemical products such as hydrogen sulfide, ammonia, and hydrogen.
Deep Engagement in High-Risk Sensing:How Can Domestic Sensors Gain Overseas Entry Tickets?
Huanshi: Do you consider your company to be scenario-driven or technology-driven? Based on our conversation, it seems strong in both aspects.
Li Jianfei: Yes, we have a solid technological foundation, but all our product development is guided by market demand. Because we interact with a vast number of end-users across various industries, we openly receive diverse requirements. We evaluate these needs before commencing development work.
Huanshi: Have you promoted your products overseas? Specifically, as a Sino-British joint venture, do you have localized promotion efforts in the UK market?
Li Jianfei: More than ten years ago, a waste-to-energy incineration plant in the UK equipped our laser gas detection devices and issued a relevant verification report. Recently, we launched a household gas alarm developed according to US standards. These standards require the device to operate without external power, meaning a single battery must support stable operation for ten years. Currently, we are the only company in the world using laser monitoring technology to meet this metric.
We began sending samples to North American partners late last year. Currently, the products largely meet US and Canadian market requirements, and we are awaiting mass shipment.
Huanshi: So your products have "gone global," not limited to domestic scenarios but also adapting to overseas demands.
Li Jianfei: Yes. We aspire for our products to reach international markets.
Huanshi: I understand you oversee after-sales service. What problems or challenges typically arise in after-sales support?
Li Jianfei: We need an after-sales department, but we also hope not to activate it frequently. When we first entered the coal mining industry to develop laser methane sensors, as a new entrant unfamiliar with the sector, issues inevitably arose. I vividly remember that a small portion of products experienced failures. Our after-sales colleagues immediately went to the frontline, working overtime to repair and replace units, spending several months resolving the problem.
Huanshi: If a product fails, emergency repair is highly challenging—it is essentially a race against time.
Li Jianfei: Yes. The transition of products from the laboratory to field conditions requires extensive iterative optimization. We provide guarantees for product upgrades and iterations through a comprehensive after-sales system.
Huanshi: Your products are undergoing continuous iterative upgrades, correct? They haven't stayed stuck at one generation.
Li Jianfei: Yes. For example, laser methane sensors with the same form factor have undergone three hardware iterations. We simultaneously push for miniaturization and have now released the Series 4 compact integrated probe. Although externally described as having iterated five generations, internal version iterations actually exceed ten rounds.
Huanshi: Having been with this company for over twenty years, I believe you have many insights from selling products to managing services. May I ask, what achievement gives you the greatest sense of accomplishment? Would you mind sharing?
Li Jianfei: The greatest sense of accomplishment comes from growing alongside the company. When I joined in 2007, the company was very small, with annual revenue of roughly one million CNY. I grew with the company, witnessing its annual revenue rise from one million, to several million, to tens of millions, and finally breaking through one hundred million CNY step by step. Being able to participate in this journey is my greatest pride.
Huanshi: Indeed, especially as the company develops better and its products find wider application, this experience is rare.
Li Jianfei: Yes. I joined this company right after graduation, and the best twenty years of my life have been spent with SMSP.
Huanshi: If you could say something to young people just entering the safety sensing and industrial IoT tracks, what advice would you give?
Li Jianfei: I believe one must commit wholeheartedly to this industry. This industry truly benefits humanity, empowers production lines, and protects every worker involved in production. If we can make good products, we can save many lives and protect many families. I consider this a socially beneficial endeavor.
Huanshi: Yes, this industry carries immense social value. After speaking with you, I genuinely feel that the slogan "Technology for Good, Technology Empowering Industries, Benefiting Society" has been realized.
Li Jianfei: Thank you for your recognition.
Huanshi: I am very happy to have had such a frank exchange with you today. I wish your products success in more scenarios, safeguarding human life and production safety.
Li Jianfei: Thank you.
Interview | Huanshi Editor | Xiao Qie Reviewer | Huanshi