Capacity upgrades bring new challenges to the equipment side; Hymson's approach to solving them
In the industry narrative of lithium batteries over the past few years, energy storage was largely viewed as a second growth curve alongside power batteries.
In 2026, energy storage is shedding this label.
According to GGII data, total domestic lithium battery shipments in the first three quarters of 2026 reached 1,945 GWh. Of this, energy storage battery shipments totaled 790 GWh, up 84% year-on-year, while power battery shipments grew by 30% year-on-year.
With such a disparity in growth rates, energy storage has taken the baton from power batteries, standing at the center stage of lithium battery growth.
GGII predicts that energy storage will officially enter the TWh scale in 2026.
A striking time comparison illustrates the speed of energy storage's advancement: it took 11 years for power batteries to go from inception to breaking 1 TWh in annual shipments, whereas energy storage batteries accomplished this feat in just 5 years.
Meanwhile, market share continues to tilt toward energy storage.
Dr. Zhang Xiaofei, Chairman of Gaogong Lithium Battery, noted at the 2026 Gaogong Lithium Battery Summit that energy storage's share of total lithium battery shipments is steadily rising.
Based on current trends, its share is expected to exceed 38% in 2026 and surpass 40% in 2027.
He anticipates that by 2028, energy storage shipments could account for more than 50%, signaling the end of power batteries' dominance in the lithium battery market.
Large Cells: The Core Lever for Reducing Energy Storage Costs
As the primary growth driver shifts to energy storage, the competitive logic for battery products changes accordingly.
Power batteries iterate based on vehicle scenarios, prioritizing lightweighting, fast charging, and spatial adaptation within vehicles;
Energy storage stations, however, focus on long-term levelized cost of electricity (LCOE) control, system integration simplification, and reduced operation and maintenance costs.
Industry calculations suggest that large-capacity cells above 500Ah can reduce cell usage by over 60%. This simultaneously streamlines BMS sampling points, wiring harnesses, and structural components, driving down system costs by10–15% and pushing LCOE closer to CNY 0.3/Wh.
This clear system-level cost reduction logic makes large cells the most certain iteration path in the energy storage sector.
Tracing technological evolution, since CATL launched the first standardized 280Ah large-scale energy storage cell in 2020, the industry has undergone multiple iterations: 280Ah and 314Ah cells have achieved widespread adoption; 587Ah, 588Ah, and 628Ah cells are entering mass production; and 1000Ah+ products are undergoing engineering validation for long-duration energy storage applications.
Rising penetration rates confirm that demand is rapidly materializing.
GGII data shows that shipments of 500Ah+ cells reached approximately 7 GWh in 2025, with a penetration rate of only 1.3%; it is projected that shipments will exceed 140 GWh in 2026, lifting the penetration rate to over 20%.
Changes in demand are directly reflected in corporate orders and centralized procurement by state-owned enterprises.
On the order front, companies like CATL, EVE Energy, Hithium, Rongjie Energy, Pengcheng Wuxian, Envision AESC, and Trina Solar have secured tens of GWh worth of orders for large cells.
Signals from centralized procurement are equally clear:
In February 2026, China Energy Storage Technology's 7 GWh cell framework tender included a dedicated package for ≥500Ah cells for the first time, sized at 2 GWh;
In March, China Huaneng's 4 GWh energy storage system procurement set aside a 1 GWh segment for 450–700Ah large cells;
In June, Lisiner initiated an annual framework purchase of 6 GWh for 587/588Ah cells;
In July, NARI Group's 4 GWh cell procurement allocated2 GWh each for specifications of ≥587Ah and ≥314Ah.
Driven by orders, the pace of supply-side capacity implementation has accelerated.
CATL's 587Ah cells are delivering stably; Hithium's 587Ah and 1175Ah cells have entered mass production delivery;
EVE Energy's 628Ah cells have achieved scaled application; Envision's first batch of 790Ah cells has been shipped to Germany;
CORNEX's 648Ah cells began mass production at the end of August; Ganfeng Lithium's 588Ah cells are in the commissioning phase;
Great Power's 587Ah cells went offline for mass production on October 10, initiating bulk supply.
Capacity Upgrades Pose New Manufacturing Challenges: Hymson's Response
The scaled deployment of large-capacity cells poses new manufacturing challenges for equipment, particularly in the mid-to-back-end processes.
During the era of 280Ah and 314Ah cells, many production lines could be adapted with minor modifications to existing setups.
However, as cell dimensions and weight increase, shortcomings in traditional manufacturing systems become concentrated.
At the stacking stage, large-format electrodes are prone to warping, sagging, misalignment, and separator wrinkling;
Burrs and dust generated during cutting and transfer exacerbate internal safety risks within the cells.
At the assembly stage, issues such as casing scratches during cell insertion and thermal deformation from long weld seams raise the difficulty of controlling welding yield;
Additionally, the coexistence of same-side and dual-side tab technologies, along with parallel production of wound and stacked cells, demands higher versatility and adaptability from production lines.
At the module assembly stage, increased self-weight of large cells complicates the management of transfer and compression stress, easily causing hidden damage to tabs and casings;
Moreover, rapid specification iterations in energy storage cells require frequent switching between multi-model cells and single/dual-row modules, continuously draining line utilization efficiency.
At the container integration stage, long process chains involving water spraying, electrolyte filling, helium leak testing, and automatic cluster insertion, combined with dispersed workstations, mean that logistics coordination and takt time synchronization directly impact overall cabinet output.
Thus, large-cell production lines cannot rely simply on scaling up individual machines. The industry urgently needs a full-chain integrated solution covering cell formation, cell assembly, module, and container integration, balancing process stability with rapid changeover capabilities.
Addressing these industry pain points, Hymson leverages underlying technologies such as lasers, motion control, machine vision, and digital twins to build a comprehensive equipment matrix spanning cell formation, prismatic cell assembly, module PACKs, and container system integration. This high-flexibility, iterable solution meets the practical needs of large-cell mass production.
In the cell formation process, Hymson's Wide-Area Precision Cutting and Stacking Solution targets ultra-large energy storage units and advanced battery routes, covering the entire manufacturing flow from laser electrode cutting to high-precision stacking.
Tackling industry challenges like stacking misalignment of large electrodes and safety hazards from dust, this solution is rooted in mass production scenarios for large-scale energy storage, ensuring stable manufacturing of ultra-high-capacity cells.
Simultaneously, it explores anode-free and lithium-metal systems, overcoming difficulties in transporting special-material electrodes and achieving high-precision stacking. It continuously iterates laser cutting processes to accommodate high-quality processing of electrodes with varying materials, thicknesses, and shapes. Currently, small-batch validation of all-solid-state cell stacking is being conducted in collaboration with clients.
After cell formation, the stability and flexibility of the assembly process directly determine the baseline yield for large cells.
Hymson's fully automated prismatic battery cell assembly line is designed with high flexibility and modularity at its core, integrating virtual debugging, laser control, digital twins, multi-axis motion control, and machine vision technologies. Throughput has evolved continuously from 12 PPM, 20 PPM, and 22 PPM to 30 PPM.
The line supports two mainstream process routes—"same-side tabs + single top cover" and "dual-side tabs + single top cover"—while accommodating both wound and stacked cells, enabling fully automated assembly without manual intervention.
The modular architecture shortens changeover cycles, reduces spare parts inventory, and controls retrofitting costs; the closed-loop production process ensures full traceability and supports integration with various MES systems;
Digital twin 3D visualization provides intuitive display and intelligent interaction of equipment status; proprietary high-precision fixtures ensure fast and accurate positioning during fixture changes.
The line also offers non-standard customization based on client-specific cell process requirements. Overall OEE is ≥80%, with maximum single-line throughput reaching 40 PPM and single-machine yield exceeding 99.8%. To date, over 200 lines comprising more than 3,200 units have been delivered.
Extending to back-end integration, the rapid iteration characteristic of energy storage cells places higher demands on the compatibility of module PACK production lines.
Hymson's module PACK lines cover mainstream energy storage cells ranging from 280Ah to 628Ah, supporting flexible switching between single and dual-row modules and enabling one-click rapid changeover for multiple configurations, ensuring high-speed ramp-up while maintaining module production efficiency and yield.
Unlike the model of supplying single pieces of equipment, this solution follows a four-in-one approach of process, technology, equipment, and service, providing full-process support to customers.
For the final step in energy storage system delivery, Hymson offers container production lines for the energy storage industry. Processes are modularly designed, equipped with intelligent AGV logistics systems, supporting rapid upgrades and capacity expansion to adapt to multi-scenario production needs with strong scalability;
The lines integrate fully automated processes including intelligent AGV transport, automatic water spray testing, electrolyte filling, helium leak testing, and automatic cluster insertion, achieving high-speed and efficient production;
Equipped with 3D cameras and AI vision-guided positioning systems, they execute automated cluster insertion with high speed and precision;
Process data is uploaded to MES in real-time, enabling full-process data tracing and monitoring, and achieving AI-driven intelligent management.
Conclusion
As 500Ah+ large cells move towards mass production, the industry focus extends beyond orders, capacity, and volume competitions. Yield, process stability, and full-chain safety have become the core variables determining the longevity of this technical route.
Unlike the standardized, large-scale expansion waves of the power battery era, the iteration of large energy storage cells is characterized by diverse specifications and rapid changes.
Clients need not only new lines to absorb additional capacity but also to revitalize existing lines to continuously adapt to evolving cell solutions.
This implies that competition in the equipment sector has moved beyond single-point comparisons of standalone machine performance. Requirements for deep process understanding, multi-process synergy, and digital flexibility have come to the forefront.
In this manufacturing transformation driven by large energy storage cells, Hymson stands at the intersection of market demand and process iteration with its complete solutions for stacking, prismatic assembly, module PACKs, and container integration.
It is not the sole solution for the industry, but it represents a significant approach to addressing the current wave of large-cell iteration in energy storage.