From etching equipment to thin-film deposition, from wafer manufacturing to advanced packaging, and further to CMP and metrology/inspection, Advanced Micro-Fabrication Equipment (AMEC) is breaking the boundaries of a specialized equipment company. However, as its product portfolio expands, what truly determines its future height is no longer just technological breakthroughs.
In 2026, China's semiconductor equipment industry is witnessing a noteworthy shift.
In the past, when discussing domestic semiconductor equipment, the market's primary concerns were often: Can domestic equipment be developed? Can it replace imports? Can it enter advanced wafer fabs?
Today, for leading equipment companies that have already achieved scaled revenue, these questions are no longer sufficient.
The new competition has shifted to deeper levels: Can an equipment company continuously launch new products? Can it obtain customer certifications across multiple critical process steps? Can it translate technological breakthroughs into large-scale orders? Can it establish sustainable operating cash flow amidst high R&D investment?
Advanced Micro-Fabrication Equipment Inc. China (hereinafter referred to as "AMEC") stands at this pivotal turning point.
In the first three quarters of 2026, AMEC reported operating revenue of CNY 10.326 billion, a year-on-year increase of 28.08%; net profit attributable to shareholders was CNY 4.134 billion, up 241.31% year-on-year; and net profit attributable to shareholders excluding non-recurring items was CNY 1.623 billion, an increase of 83.01% year-on-year.
Simultaneously, the company has cumulatively deployed over 9,300 reaction chambers in mass production on production lines both domestically and internationally, developed 54 types of high-end semiconductor equipment, and invested CNY 3.222 billion in R&D.
More significantly, in 2026, AMEC is advancing simultaneously across multiple business fronts: thin-film deposition equipment entering more customer production lines, completing the controlling acquisition of CMP equipment provider Sizontech, launching and shipping its first plasma wafer dicing equipment, and having its Lingang industrialization base selected for the 2026 Excellence-Level Smart Factory Project Publicity List.
Behind these changes lies a fundamental strategic question: Can AMEC evolve from a domestic leader centered on etching equipment into a comprehensive semiconductor equipment platform with international competitiveness?
This may be more important than merely discussing a company's quarterly performance.
I. From CNY 6.2 Billion to CNY 10.3 Billion: What Drives AMEC's Growth?
Let us first examine the operational data.
In 2023, AMEC's operating revenue was CNY 6.264 billion.
In 2024, revenue grew to CNY 9.065 billion, a year-on-year increase of 44.73%.
In 2025, revenue reached CNY 12.385 billion, up 36.62% year-on-year.
Over two years, the company's revenue scale nearly doubled.
In the first three quarters of 2026, operating revenue reached CNY 10.326 billion, surpassing the full-year revenue level of 2024.
If one only observes the revenue curve, AMEC has demonstrated strong scaled growth capabilities typical of top-tier domestic high-end semiconductor equipment enterprises.
However, the structure of this growth warrants closer scrutiny.
In 2023, sales revenue from AMEC's etching equipment was approximately CNY 4.703 billion; this grew to CNY 7.277 billion in 2024, and further reached CNY 9.832 billion in 2025.
This implies that in 2025, etching equipment contributed nearly 80% of the company's total operating revenue.
It remains AMEC's most critical source of income and the core support for its technical capabilities, customer base, and competitive position.
Nevertheless, the operational data from 2026 also indicates that growth is not without fluctuations.
In Q32026 alone, operating revenue was CNY 3.635 billion, a year-on-year increase of 17.18%, which is lower than the cumulative 28.08% growth rate for the first three quarters.
For semiconductor equipment companies, variations in single-quarter revenue growth rates may be related to order delivery, equipment acceptance, customer capital expenditure schedules, and product mix changes. It is premature to judge a reversal in growth trends based on a single quarter.
However, it prompts investors to investigate further: Will AMEC's future growth stem from increased market share of existing etching products in customer production lines, or from the sustained ramp-up of thin-film, CMP, and new businesses?
These two growth models correspond to different technical risks, commercialization cycles, and capital return characteristics.
Meanwhile, the industry environment continues to provide significant opportunities.
According to SEMI's mid-year forecast released on July 14, 2026, global semiconductor manufacturing equipment sales are expected to reach USD 165.9 billion in 2026, a year-on-year increase of 23.2%. Investment in advanced logic, advanced memory, HBM, and advanced packaging serves as key drivers for equipment demand expansion.
It must be emphasized, however, that the USD 165.9 billion figure represents the overall global semiconductor manufacturing equipment market size, not necessarily the addressable market space where AMEC can directly compete.
For any equipment company, the meaningful market size should be defined by specific processes they can participate in, customer procurement budgets, certification progress, and obtainable order shares.
II. Etching Equipment: AMEC's True Moat Is Not "How Many Nanometers"
To understand AMEC's core competitiveness, one must return to the etching process itself.
In wafer manufacturing, lithography equipment forms patterns, while etching equipment selectively removes specific materials according to those pattern requirements.
As semiconductor devices evolve from 2D planes to 3D structures, the difficulty of etching processes has increased significantly.
Especially in advanced memory manufacturing, as the layer count of 3D NAND increases and deep-hole and trench structures become more complex, there are extremely high demands for etching equipment regarding high aspect ratio processing capability, material selectivity, uniformity, and process stability.
AMEC has currently established two main etching technology routes.
The first is CCP (Capacitively Coupled Plasma) etching technology, primarily serving numerous dielectric etching applications.
The second is ICP (Inductively Coupled Plasma) etching technology, widely used in etching processes requiring precise adjustment of plasma density and ion energy.
AMEC discloses that its etching equipment covers various etching applications ranging from 65nm to 3nm and more advanced nodes.
In terms of ultra-high aspect ratio etching, the company continues to advance 60:1 and 90:1 dielectric etching processes, as well as 140:1 high aspect ratio silicon etching technology.
These technical indicators carry significant engineering importance, but their applicability conditions must be noted: laboratory process results, customer validation results, and stable mass production results are not synonymous.
Evaluating an etching equipment company requires looking beyond the most advanced technical parameters to see if these parameters can be achieved long-term, stably, and cost-effectively on customer production lines.
True technical barriers often manifest across multiple dimensions.
First, whether the process window is sufficiently wide to accommodate complex process fluctuations.
Second, consistency between chambers and across different batches of wafers.
Third, equipment reliability after prolonged operation, particle contamination control, and maintenance cycles.
Fourth, the accumulation of process data, fault handling experience, and application engineering capabilities during customer onboarding.
Fifth, the ability to continuously meet customer requirements at reasonable maintenance costs after equipment delivery.
From this perspective, the fact that AMEC has cumulatively deployed over 9,300 reaction chambers in mass production by the end of September 2026 is highly significant commercial information.
Note that the number of reaction chambers does not equate to the number of tools, nor can it be directly used to estimate revenue scale.
Its greater significance lies in demonstrating that the company has formed a substantial basis of real-world application.
A notable characteristic of the semiconductor equipment industry is that once customers complete strict certification and consistently use a specific tool in critical processes, subsequent tool iterations, capacity expansions, and process development may lead to deeper cooperation.
Therefore, for AMEC, the long-established customer certifications and mass production experience in etching equipment may hold more sustained competitive value than any single technical parameter.
III. Thin-Film Deposition: AMEC's Second Growth Curve Begins to Form
If etching equipment defines AMEC's foundation, then thin-film deposition equipment may determine the company's next stage of growth potential.
Semiconductor manufacturing is not simply repeating etching.
From transistor formation to complex memory structure fabrication, chips require repeated thin-film deposition, patterning, etching, and other process treatments.
As device structures become more complex, the importance of thin-film deposition technology rises further.
Particularly in advanced logic, 3D NAND, and DRAM domains, equipment needs to form films with uniform thickness, controllable composition, and low defect density on extremely complex 3D structural surfaces.
This makes ALD, LPCVD, EPI, and other chemical vapor deposition technologies critical links in advanced nodes.
AMEC is leveraging its accumulated expertise in plasma, vacuum control, gas transport, chamber design, and precision control to expand into related deposition equipment areas.
Its commercialization progress has begun to reflect in financial data.
In 2024, AMEC's LPCVD equipment sales revenue was approximately CNY 156 million.
In 2025, this figure grew to CNY 506 million, a year-on-year increase of 224.23%.
According to the "2027 Quality Improvement and Efficiency Enhancement Action Plan 2.0" disclosed by the company in November 2026, multiple new LPCVD and ALD tools have entered the market and secured repeat orders, with cumulative shipments of thin-film equipment exceeding 500 reaction chambers.
There are two noteworthy changes here.
The first change is that the thin-film business is transitioning from R&D investment to commercialized revenue.
The second change is that some products have moved from initial customer introduction to the repeat procurement stage.
For semiconductor equipment manufacturers, these two milestones differ in significance.
An initial order may indicate a customer's willingness to validate a new technology route, whereas repeat orders typically imply that the equipment has passed practical usage tests within a certain scope.
Of course, repeat procurement does not mean all products have achieved large-scale mass production, nor does it imply that the thin-film business possesses the same profitability as the etching business.
Determining whether the second growth curve is truly established requires observing new product revenue scale, gross margins, customer count, per-customer procurement volume, and the sustainability of subsequent orders.
Another area of interest for AMEC is MOCVD.
The company has built a strong market foundation in GaN-based LED epitaxy equipment, but traditional LED equipment demand exhibits clear cyclicality.
In 2023, AMEC's MOCVD equipment revenue was approximately CNY 462 million, declining to CNY 379 million in 2024.
This change illustrates that even if an equipment manufacturer holds a strong competitive position, downstream capital expenditure cycles can still impact business growth.
The company is expanding into Micro-LED, GaN power devices, red/yellow LED, and InP-related epitaxy equipment.
These directions share technical relevance, but market maturity, equipment validation cycles, and customer investment pacing vary across applications.
The most critical aspect of AMEC's thin-film equipment business is not the expansion of the product line itself, but whether new equipment can repeatedly follow the commercialization path previously traversed by the etching business.
IV. Extending from Front-End to Advanced Packaging: Why Primo Matrix Matters?
In 2026, AMEC launched and shipped its first Primo Matrix dual-chamber plasma wafer dicing tool.
This is a noteworthy product deployment.
Wafer dicing is a crucial process in chip packaging manufacturing.
Traditional wafer dicing typically employs mechanical blades or laser technologies. As chip sizes shrink, wafer thickness decreases, and advanced packaging structures become increasingly complex, certain applications impose higher requirements on street width, edge damage, dicing accuracy, and production efficiency.
Plasma dicing removes street materials via etching processes, offering a machining path distinct from traditional mechanical cutting for specific devices and processes.
According to AMEC's product documentation, Primo Matrix is developed based on its existing Primo TSV deep silicon etching technology and features the following:
Support for 200mm and 300mm wafer processing; suitability for processes with street widths as small as 5 microns; support for wafer thicknesses ranging from 25 to 700 microns; and configurations supporting up to 6 etching reaction chambers.
The product also supports processes such as front-side dicing of wafers with bumps, plasma dicing after laser grooving, and backside etching.
From an industrial perspective, the significance of this product lies in AMEC's attempt to migrate its existing etching process platform into the advanced packaging equipment market.
This is a product expansion path grounded in technical reuse logic.
Compared to entirely entering an unfamiliar technical field, developing new equipment based on mature platforms offers opportunities to reuse existing chamber designs, control systems, supply chains, and customer service experiences.
However, it is essential to distinguish between product technical specifications and actual commercialization outcomes.
Supporting a 5-micron street width does not guarantee identical process performance across all materials and wafer structures; completing the first shipment does not equate to final customer acceptance or the formation of scalable orders.
Future verification will focus on dicing yield, edge damage, per-wafer processing cost, equipment throughput, and long-term operational stability in specific customer production lines.
Only by establishing sustainable competitive advantages in these metrics can Primo Matrix potentially evolve from a promising new product into a new revenue source.
V. CMP Acquisition: A Key Step from Specialized Manufacturer to Platform Company
In 2026, AMEC completed the controlling acquisition of Sizontech, formally supplementing its CMP equipment capabilities.
This transaction carries clear strategic significance.
CMP (Chemical Mechanical Polishing) is a vital process for achieving surface planarization in wafer manufacturing.
In advanced logic and memory device manufacturing, CMP is closely linked to thin-film deposition and etching processes.
From a product portfolio perspective, adding CMP extends AMEC's coverage from etching and thin-film deposition processes into the planarization segment.
However, it must be recognized that possessing CMP products does not imply covering all wet-processing equipment, nor does it mean providing a complete equipment system for wafer fabs.
The true value of this acquisition lies in whether AMEC can leverage its existing customer network, R&D system, and supply chain capabilities to accelerate the commercialization of CMP equipment.
Regarding transaction data:
On May 31, 2026, AMEC acquired 64.69% equity in Sizontech through share issuance and cash payment, corresponding to a transaction price of approximately CNY 1.576 billion, achieving control.
The total valuation for the target company's entire equity corresponds to approximately CNY 2.436 billion.
According to the acquisition report, Sizontech's operating revenue in 2025 was approximately CNY 244 million, with a net loss of approximately CNY 93 million and a gross margin of 26.28%.
If statically compared using 2025 revenue, the total equity valuation corresponds to approximately 10 times annual revenue.
This static multiple neither proves nor disproves that the transaction valuation is too high or too low, as technical assets, customer certifications, future scaling potential, and strategic synergies of equipment companies must also be considered.
However, it signifies that realizing transaction value is heavily dependent on future growth.
The performance commitments involved in the merger agreement state that Sizontech's consolidated operating revenue shall be no less than CNY 280 million, CNY 430 million, and CNY 580 million for 2026, 2027, and 2028, respectively.
It is particularly noteworthy that the relevant performance commitments use operating revenue as the core assessment metric, rather than net profit or operating cash flow.
Therefore, even if future revenue meets the committed targets, it does not necessarily imply that the target enterprise has formed stable profitability.
According to AMEC's Q3 2026 balance sheet, its goodwill balance is approximately CNY 1.060 billion, corresponding to the goodwill formed from this acquisition.
For investors, the focus should extend beyond the fulfillment of performance commitments to include improvements in CMP product gross margins, narrowing of operating losses, customer repeat purchases, and goodwill impairment risks.
The core of an M&A strategy has never been about adding more products to the company profile, but rather converting new businesses into operations capable of sustaining economic returns.
This constitutes a significant test for AMEC's platformization strategy.
VI. Smart Factory: Semiconductor Equipment Competition Shifting from Technology to Operational Systems
Once high-end equipment companies reach a certain scale, they face an easily overlooked challenge.
The ability to manufacture dozens of excellent tools does not imply the ability to produce hundreds or more with reasonable costs, stable quality, and predictable delivery times.
Semiconductor equipment typically comprises numerous precision components, mechanical structures, electrical systems, software modules, and complex process modules.
As product variety increases, the complexity of production planning, supply chain management, quality control, engineering changes, and after-sales support continues to rise.
AMEC's selection of its Lingang industrialization base for the 2026 Excellence-Level Smart Factory Project Publicity List reflects the company's emphasis on building its manufacturing system.
According to the smart factory materials provided by the company, the Lingang base has constructed over 40 business systems covering R&D, production, and supply chain, implementing 12 AI application scenarios.
The company discloses that related digitalization and intelligent construction efforts have resulted in reducing product development cycles from 3–5 years to under 2 years, shortening tool delivery cycles by nearly 40%, and accelerating inventory turnover by approximately 48%.
These are disclosed operational improvement results; the specific scope of application and statistical methodologies still need to be observed in conjunction with actual operational data.
However, from an industrial logic perspective, the direction is commendable.
When an equipment vendor expands from etching to thin-film, CMP, and advanced packaging equipment, the previous model of relying on single-product teams to solve problems becomes increasingly inadequate to support organizational expansion.
The prerequisite for platformization is not just sharing technology platforms, but forming shared engineering capabilities, supply chain management systems, and quality control frameworks.
Therefore, what AMEC is building is not just more products, but an operational system capable of continuously developing, manufacturing, and delivering complex equipment.
In the future, whether this system can genuinely reduce unit manufacturing costs, improve on-time delivery rates, and minimize quality losses and after-sales costs will directly impact the company's long-term profitability.
VII. The Other Side of Financial Reports: Revenue Growth, Investment Income, and Cash Flow
If one only looks at the net profit attributable to shareholders for the first three quarters of 2026, AMEC has clearly delivered an impressive performance.
Net profit attributable to shareholders was CNY 4.134 billion, a year-on-year increase of 241.31%.
However, from an operational analysis perspective, this metric needs to be deconstructed.
During the same period, net profit attributable to shareholders excluding non-recurring items was CNY 1.623 billion, an increase of 83.01% year-on-year.
The difference of approximately CNY 2.511 billion indicates that non-recurring gains and losses had a significant impact on current period profits.
According to the third-quarter report, in the first three quarters of 2026, the company generated substantial fair value change gains and investment income from external equity investments, while also realizing investment income from selling part of its Piotech shares.
These earnings reflect the value of the company's industrial investment layout, but they differ markedly from continuous operating profits derived from equipment sales in terms of predictability and valuation logic.
One cannot assume that improved profitability in etching, thin-film, or CMP equipment has occurred to the same extent simply because investment income increased.
On the other hand, the 83.01% year-on-year growth in adjusted net profit demonstrates that the company's core operational achievements have made significant progress, not solely relying on financial asset returns.
What truly requires continuous observation is whether operating profit can be converted into cash.
In 2025, AMEC's net cash flow from operating activities for the full year was approximately CNY 2.295 billion.
However, in the first three quarters of 2026, net cash flow from operating activities was approximately negative CNY 105 million, compared to positive CNY 1.298 billion in the same period last year.
Meanwhile, as of the end of September 2026, the company's accounts receivable stood at approximately CNY 3.696 billion, a significant increase from CNY 1.987 billion at the end of 2025.
Inventory balances increased from approximately CNY 7.170 billion at the end of 2025 to approximately CNY 9.084 billion.
Contract liabilities decreased from approximately CNY 3.044 billion at the end of 2025 to approximately CNY 2.264 billion.
These metrics need to be interpreted collectively.
During rapid expansion phases, semiconductor equipment companies may need to pre-purchase key components, prepare for equipment production, and wait for customers to complete installation, debugging, and acceptance.
Therefore, growth in accounts receivable and inventory does not necessarily imply deteriorating operations.
However, if revenue continues to grow while collection efficiency, inventory turnover, and customer prepayments do not improve synchronously, working capital occupation may increase.
Especially for equipment companies maintaining high-intensity R&D investment, profit growth must ultimately translate into cash generation capability to ensure higher sustainability.
Two additional metrics warrant attention.
First, customer concentration.
The 2025 annual report shows that revenue from Customer A was approximately CNY 4.952 billion, accounting for 39.99% of total annual operating revenue, up from 22.15% in 2024.
Holding large-scale head customers may indicate that the company's equipment has entered critical production lines, but high dependency on a single customer means that changes in that customer's capital expenditure, procurement rhythm, and bargaining power could significantly impact the company's operations.
Second, capitalization of R&D expenses.
In the first half of 2026, AMEC's R&D investment was approximately CNY 2.041 billion, of which capitalized R&D investment was approximately CNY 689 million, resulting in a capitalization ratio of 33.74%, higher than the 20.72% recorded in the same period last year.
The company explains that this is primarily due to several major R&D projects meeting capitalization criteria.
Continued growth in R&D investment reflects the company's emphasis on long-term technical competitiveness, but total R&D investment is not equivalent to R&D expenses listed in the current period income statement.
Capitalized R&D expenditures require amortization in the future according to relevant accounting policies and may face impairment risks if project commercialization falls below expectations.
Therefore, when analyzing AMEC's earnings quality, beyond focusing on R&D intensity, one should observe the commercialization efficiency of R&D outcomes and the ability of R&D assets to convert into product revenue and cash flow.
VIII. After Platformization, AMEC Must Cross Three More Thresholds
AMEC is evolving from a specialized equipment leader into a multi-category high-end equipment platform.
This transformation possesses clear industrial logic but is not without challenges.
First Threshold: From Technical Development to Stable Mass Production.
The fact that the company has developed 54 types of high-end equipment does not mean all 54 are at the same commercialization stage.
Some equipment has formed stable customer mass production applications, some have secured repeat orders, while others remain in validation, R&D, or market introduction stages.
What truly matters in the future is not how much the product count grows, but how many products can transition from prototypes to certification, from certification to batch orders, and from batch orders to scaled repurchases.
Second Threshold: From Specialized Product Competitiveness to Platformized Organizational Capability.
Although etching, thin-film deposition, CMP, and metrology/inspection equipment serve the same supply chain, their technical teams, process development, supply chain systems, customer onboarding, and after-sales engineering requirements are not entirely identical.
Whether multiple product lines can achieve organizational synergy while maintaining professional advantages is a test of the company's management capabilities.
Especially amid parallel acquisition integration and high R&D investment, whether management resources are dispersed, key talent remains stable, and project investments yield reasonable returns will be issues requiring long-term observation.
Third Threshold: From Revenue Scale Growth to Capital Return Improvement.
For semiconductor equipment companies, growth is not just about continuously expanding sales revenue.
Companies must also control capital expenditure, inventory, accounts receivable, and R&D costs while maintaining sufficient product competitiveness.
In November 2026, AMEC's Board of Directors approved a share buyback plan of CNY 400 million to CNY 500 million, intending to use the repurchased shares for equity incentives or employee stock ownership plans.
This arrangement helps refine long-term incentive mechanisms, but since the buyback purpose is not direct cancellation, it cannot be simply viewed as a permanent reduction in circulating shares or a guarantee of enhanced EPS.
In the future, capital allocation capability will become increasingly important.
Companies must establish a reasonable balance among new product R&D, capacity building, industrial investment, M&A integration, employee incentives, and shareholder returns.
This is precisely the capability required for a growing hard-tech company to mature into a sophisticated equipment group.
IX. Over the Next Three Years, How to Judge AMEC's Growth Quality?
From an industrial research perspective, judging whether AMEC has truly completed its platformization leap involves tracking four categories of metrics.
First is the competitiveness of the core etching business.
Focus on its mass production coverage, customer share, and repeat purchase status in key applications such as advanced logic and advanced memory.
Second is the revenue realization capability of new businesses in thin-film deposition and advanced packaging.
Pay particular attention to whether LPCVD, ALD, EPI, and other equipment can form sustained orders, and whether new products like Primo Matrix can complete customer validation and enter scaled delivery.
Third is the operational outcomes of M&A synergies.
Whether Sizontech meets revenue commitments is only part of the picture; more importantly, monitor CMP business gross margins, profitability, customer certifications, cash flow, and integration progress.
Finally, financial and capital efficiency.
Does accounts receivable growth match revenue growth? Can inventory smoothly convert into equipment delivery and revenue recognition? Can operating cash flow improve? Can sustained high R&D investment form a product portfolio with reasonable returns?
These metrics may reflect the company's long-term competitiveness better than single-quarter profit growth rates.
Conclusion: After Domestic Substitution, the Next Competition Truly Begins
Over the past two decades, Chinese semiconductor equipment companies have been climbing upwards.
From initial technology catch-up to product development, to entering customer production lines and forming scaled revenue, the domestic equipment industry has achieved a series of significant breakthroughs.
AMEC is a representative enterprise in this industrial progression.
The scaled mass production foundation of its etching equipment constitutes a strong business base; the commercialization progress of thin-film deposition equipment opens new growth possibilities; and deployments in advanced packaging, CMP, and metrology/inspection reflect the strategic direction towards a multi-category equipment platform.
However, it must be recognized that moving from product breakthroughs to market leadership, and further to forming sustainable global competitive advantages, requires different capabilities at each stage.
Technical advancement does not equal order success.
Increasing product variety does not equal enhanced profitability.
Growth in operating revenue does not equal improved operating cash flow.
M&A creating synergy expectations does not equal realized synergy value.
For AMEC, the most anticipated aspect of the future is not simply replicating past high-growth curves, but gradually establishing a comprehensive capability to continuously launch new products, serve more critical processes, achieve stable deliveries, and generate good capital returns.
If the first phase of AMEC proved that Chinese companies can produce high-end etching equipment with international competitiveness, the next phase requires proving that Chinese semiconductor equipment companies can form a sustainable, multi-product, multi-process global competitive system.
This is where AMEC truly merits long-term study.
This article is for industrial research exchange purposes and does not constitute securities investment advice.