On November 10, Hesai released a landmark Q3 financial report. During the earnings call, management announced: “In the third quarter, robotics-related revenue exceeded 50% (including LiDAR, data, and joint modules).” For a company historically known for automotive LiDAR, this marked the first time its revenue structure shifted at the “over half” threshold.
This “over half” figure includes contributions from robotics LiDAR, as well as initial revenue releases from power modules and Kosmo (spatial data engine).
01、A Stable Core Business Enables Pursuit of the Second Growth Curve
First, let’s look at the fundamentals. Q3 revenue reached CNY 1.068 billion, up 34.3% year-over-year; LiDAR shipments totaled 729,700 units, increasing 65.3% year-over-year; GAAP net profit was CNY 80.79 million, positive for the sixth consecutive quarter. The significant year-over-year decline in net profit was primarily due to approximately CNY 185 million in one-time gains in the same period last year; excluding this, net profit grew 13.7% year-over-year.
More critical indicators are found in segment profits: The LiDAR business generated an operating profit of CNY 145 million in Q3, up 88% year-over-year, while absolute expense levels remained largely flat. This indicates that Hesai’s core LiDAR business has entered a phase with high conversion efficiency from “revenue growth—gross margin increment—operating profit.” Automotive ADAS shipments of 638,100 units remain the dominant volume, but robotics LiDAR shipments reached 91,600 units in Q3, growing 51.1% year-over-year, typically commanding higher average selling prices and margins compared to low-end categories like robotic lawn mowers. The profitability resilience of the core business is the prerequisite that allows Hesai to tolerate short-term losses in its Strategic Growth Initiatives (SGI).
02、SGI’s CNY 90.51 Million: One Manages “Motion,” the Other Manages “Vision”
The SGI (Strategic Growth Initiatives) segment reported Q3 revenue of CNY 90.51 million, a 101.4% increase quarter-over-quarter; cumulative revenue for the first three quarters reached CNY 135 million, already surpassing the original full-year target of CNY 100 million. The company reaffirmed its guidance of CNY 200–300 million for full-year 2026. However, the segment recorded an operating loss of CNY 197 million for the first three quarters, with a single-quarter loss of CNY 82.89 million in Q3. As revenue climbs, so do losses, representing a typical profile of an “infrastructure investment phase.”
The two product lines under SGI are complementary.
1. Enabling Robots to “Move.” Robotics power module deliveries reached 23,405 sets in Q3 alone, up 96.8% quarter-over-quarter. By the end of September, cumulative shipments totaled 35,295 sets, with monthly production capacity increased to 10,000 sets. Full-body joint modules have entered mass production.
In late 2024, three co-founders of Hesai established Sharpa, an independently operated AI robotics company. In March 2025, Hesai signed a product supply framework agreement with Sharpa to provide LiDAR and power modules. By July 2026, due to the “accelerated commercialization of dexterous hand products,” the annual cap on related-party transactions between the two companies was raised from CNY 100 million to CNY 300 million, with the power module component specifically increasing from CNY 75 million to CNY 221 million. Sharpa’s dexterous hands have been integrated into NVIDIA’s Isaac GR00T humanoid robot reference design. Hesai’s power modules are effectively validating the migration of “automotive-grade manufacturing capabilities to robotic execution systems” within a demanding full-machine scenario. Management expects six-figure shipment volumes for power modules by 2027, corresponding to the scale achieved after expanding from dexterous hands to full-body joints.
2. Enabling Robots to “See the World.” In October, the Kosmo 3D world data engine was globally launched, though it had already begun contributing revenue following the shipment of initial prototypes in July.
The partnership list holds significant value: Pixar has integrated Kosmo-generated 3DGS data into its RenderMan rendering pipeline; Amap piloted the first 1,000 3D scenes; and GALBOT, Yuanli Lingji, and Hesai signed strategic cooperation agreements. Management’s assessment of market potential is direct: Every humanoid robot company will require approximately 100,000 high-quality spatial data samples for simulation training in the future. Kosmo generates high-fidelity, interactive 3D environments, addressing the gap created by the high cost of real-world data collection and the inability of traditional simulations to fully replicate physical complexity.
03、The Underlying Logic of “Over Half”: Same Capabilities, Different Loads
Viewing power modules and Kosmo together completes Hesai’s transformation narrative. At the Kosmo launch event, Li Yifan shared a key insight: Hesai’s accumulated core competencies comprise precision mechanics, motor drives, optical systems, specialized chips, and automotive-grade automated manufacturing. The underlying engineering capabilities required for LiDAR and robotic joints overlap significantly; only the technical combination has changed, dealing a different “hand of cards.”
Humanoid robot joints account for more than half of the total bill of materials (BOM) cost. Hesai’s experience in driving LiDAR costs down from over CNY 300,000 to USD 200 and compressing production cycles to one unit every five to six seconds is precisely the rarest asset needed to move robotic joints from the laboratory to six-figure shipment volumes.
Expert Commentary on Robotics
Robotics-related revenue exceeding 50% indeed signifies that Hesai’s revenue structure has transcended the “auto parts” framework. With products, customers, and revenue present simultaneously across perception (robotics LiDAR), actuation (power modules), and data (Kosmo), the outline of Physical AI infrastructure is more concrete than most “transformation stories.”
However, whether Hesai qualifies as a “pure-play robotics and Physical AI concept stock” depends on fulfilling two conditions.
First, the SGI loss curve must converge. The company has set clear targets: SGI revenue of approximately CNY 700 million and break-even status by 2027. Second, operating profit from the core LiDAR business must be sustained. Demand for automotive ADAS remains weaker than early-year expectations, and price competition persists.
Currently, Hesai has presented its first verifiable bill for “Physical AI.” On the next bill, the rate of narrowing SGI losses will answer the question of whether a new era has arrived more convincingly than revenue growth rates alone.
This article is compiled based on publicly available online information, intended for reference only, and does not constitute investment advice.