EN / 中文

FiiO DARKSIDE MINI Teardown: Active Noise-Canceling Purified Power Supply for HiFi DACs

by chongdiantouwang·November 13, 2026

In the HiFi community, there is a common saying: if the sound isn't clean enough, suspect the power supply first. This advice has been a staple on audiophile forums for years, but few manufacturers are willing to invest in it specifically. Dedicated power supplies for DAC/amps often cost significantly more than upgrading cables.

The FiiO DARKSIDE MINI, model F8001D, belongs to FiiO's newly launched DARKSIDE purified power series. This product is designed specifically for high-fidelity portable players, DAC/amps, desktop audio equipment, and digital devices that support 5V power input.

Its core highlight lies in borrowing the working principle of active noise-canceling headphones. It features an intelligent control chip that detects noise in real-time and generates anti-phase cancellation signals, combined with a proprietary high-coupling transformer and low floating ground voltage design. Additionally, the product comes standard with rich modular adapters, covering Type-C, USB-A, and various DC interface devices in one set.

Chongdiantou has also compiled the specifications into a summary chart for easy reference.

Product Appearance

The packaging features a minimalist gray and white color scheme, with a hanging tab at the top and the FiiO brand logo printed on the front.

The back of the box displays a bilingual (Chinese/English) product overview, a specification table, safety certification marks, and manufacturer information. Detailed specifications will be discussed later.

The side of the box shows diagrams of the power cord and four adapter specifications.

The other side highlights the product's four core selling points through text and graphics.

Opening the package reveals the FiiO DARKSIDE MINI purified noise-canceling power supply unit along with four different modular adapters.

An overview of the four included modular adapters.

Front view of the four modular adapters.

Rear view of the four modular adapters.

The FiiO DARKSIDE MINI uses a built-in output cable design. The casing is made of deep black matte PC flame-retardant material, offering a fine texture and fingerprint resistance.

The front of the unit is simple, featuring a silver-gray FiiO brand logo at the top.

The rear features detachable modular pins and a PUSH locking button. A nameplate with detailed product specifications is embossed below.

A close-up of the detachable pin structure, with "OPEN" and "LOCK" rotation indicators on the base.

Pressing the side "PUSH" lock button and rotating counterclockwise allows easy removal of the two-pin plug module.

The cable exit point at the bottom features a thick, stepped strain relief sleeve to protect the wire cores from daily bending damage.

Detailed information on the rear nameplate:

Product Name: Purified Noise-Canceling Power Supply

Model: F8001D

Input: 100-240V~ 50/60Hz 0.4A Max

Output: 5.0V/2.5A (12.5W)

Manufacturer: Guangzhou FiiO Electronics Technology Co., Ltd.

The product has passed multiple domestic and international authoritative safety certifications including CCC, CE, UKCA, FC, TÜV, PSE, and RoHS.

The end of the built-in line is a standard DC round male connector, with an extended strain relief boot at the tail.

Close-up of the built-in output cable body, wrapped in dense black braided tubing for abrasion and pull resistance.

The end of the output cable is equipped with a black ferrite bead to further suppress high-frequency common-mode electromagnetic interference and improve power purity.

Dimensions and Weight

Measured length of the power supply body using calipers: 71.43mm.

Measured width of the power supply body: 43.43mm.

Measured thickness of the power supply body: 30.66mm.

Total weight of the power supply with cable measured at approximately 144.5g.

The total length of the built-in output cable was measured at approximately152cm.

A visual size comparison when held in an adult male's hand.

Performance Testing

Using a POWER-Z KM003C with an adapter to test the USB-C port fast charging protocols, it only supports the DCP charging protocol.

Under no-load conditions, the electronic load reads 5.34332V at 0.001A. The output voltage is slightly higher than the nominal 5.0V.

The output ripple waveform under no-load conditions is relatively smooth, with an oscilloscope measuring a maximum peak of 1.76mV and a peak-to-peak value of 3.20mV.

The electronic load reads an output voltage of 4.6916V and current of 2.4998A.

The output ripple under full-load conditions is equally smooth, with an oscilloscope measuring a maximum peak of 1.84mV and a peak-to-peak value of 3.92mV.

Teardown

Having reviewed the appearance, accessories, and ripple performance of the FiiO DARKSIDE MINI, we now proceed to the teardown.

Opening the shell along the seams reveals the internal PCBA module secured in the base case via clips.

Removing the PCBA module from the base case.

Measured length of the PCBA module using calipers: 64.24mm.

Measured thickness of the PCBA module: 22.50mm.

After cleaning off the white adhesive, here is the front view of the PCBA module.

Rear view of the PCBA module, featuring a clear white grid isolation band between primary and secondary sides.

Front view of the cleaned PCBA module, showing filter capacitors, transformer, main controller chips, etc.

Rear view of the PCBA board.

Close-up of the input fuse.

Close-up of the NTC thermistor.

Close-up of the varistor.

Close-up of an X2 safety capacitor from HTE.

Close-up of a common-mode inductor, with the magnetic core and windings wrapped in yellow insulation tape.

An ABS10 SMD bridge rectifier is located on the lower left of the primary side on the rear of the PCBA module.

Close-up of two high-voltage filter capacitors.

One capacitor is from CH Chuanghui, rated 400V 33μF.

The other capacitor is also from Chuanghui, rated 400V 33μF.

Close-up of the primary AC-DC main controller chip from Developer Microelectronics, marked DP2364.

The synchronous rectifier is also from Developer Microelectronics, model DP6015. The DP6015CSP supports both positive and negative output terminals, integrates a 60V high-voltage supply circuit, eliminating the need for auxiliary winding power supply, thus reducing system cost.

The DP6015CSP features unique anti-mis-turn-on technology to effectively prevent SR mis-turn-on caused by VDS oscillation. It offers extremely short turn-on and turn-off delays to achieve the highest possible efficiency. It comes in an SOP8 package.

Close-up of the transformer.

Close-up of the optocoupler, marked EL817.

Two Y safety capacitors, marked HTC101K.

Close-up of the low-voltage output filter capacitor from Chuanghui, rated 10V 1500μF.

Additionally, two low-voltage filter capacitors rated 10V 3300μF, also from Chuanghui.

Close-up of two ferrite beads enclosed in black heat shrink tubing.

Teardown complete. Here is a final group photo.

Summary

The FiiO DARKSIDE MINI purified noise-canceling power supply targets devices sensitive to power supply noise, such as portable players and DAC/amps, providing a rated output of 5V 2.5A, 12.5W. The product features a black matte casing and detachable pins, accommodating both desktop placement and power needs for various interface devices.

Through the teardown, Chongdiantou learned that the input stage includes a fuse, NTC thermistor, varistor, X2 safety capacitor, and common-mode inductor. It uses an ABS10 bridge rectifier and two Chuanghui 400V 33μF electrolytic capacitors for rectification and filtering.

The power solution pairs the DP2364 main controller chip with the DP6015 synchronous rectifier chip. The output stage utilizes one 10V 1500μF capacitor and two 10V 3300μF capacitors, along with ferrite beads for further filtering.

From Chongdiantou's perspective, the product employs comprehensive filtering measures focused on low-noise power delivery. Combined with modular accessories, it offers a viable option for users requiring stable 5V low-ripple power.