EN / 中文

BMW Rolls Out 46120 Large Cylindrical Cells as Envision AESC Tops 10 Million Deliveries

by gaogonglidian·November 19, 2026

The mass production yield of 46120 cells has reached 95%, with continuous deliveries to major automakers' mid-to-large SUVs.

BMW is pushing its global mainline SUV product line toward 46-series large cylindrical cells.

On November 13, BMW's Woodruff plant in the United States officially launched mass production of sixth-generation high-voltage batteries, supplying the all-new electric iX5.

With this, BMW now has four Gen6 battery pack assembly plants entering series production, covering Europe, Asia, and North America.

New progress has also emerged in upstream cell supply.

Recently, Envision AESC's cumulative delivery of 46120 large cylindrical cells exceeded 10 million units, with a mass production yield reaching 95%.

From the formation of a global manufacturing network to the delivery of tens of millions of cells, 46-series large cylindrical cells are witnessing more concrete commercialization progress on the vehicle side.

This shift is worth observing within the broader context of the entire large cylindrical market.

Data from GGII (Gaogong Industry Research) shows that China's shipments of large cylindrical batteries reached 30GWh in 2025, a year-on-year increase of over 130%, with small power and energy storage being the primary growth markets.

However, penetration in the automotive sector remains relatively slow.

In the first half of 2026, the installed capacity of cylindrical power batteries in China was only 6.7GWh, an 8% year-on-year increase, accounting for approximately 2% of the total installed power battery capacity during the same period.

Large cylindrical cells have achieved high growth, but the truly significant opportunities in the high-end passenger vehicle market still lie within mainstream automakers' product platforms.

BMW is bringing this opportunity into actual mass production.

BMW Brings Large Cylindrical Cells to Mainline Vehicle Series

The ultimate scale of large cylindrical cells in the passenger vehicle market depends on how many models and sales volumes automakers are willing to entrust to them.

BMW's choice deserves to be measured against this standard.

On June 30 of this year, BMW unveiled the all-new electric iX5, introducing 46120 large cylindrical cells into the X5 product line.

The X5 is a critical SUV series for BMW in the global market, boasting a mature sales foundation.

According to BMW's third-quarter report released on November 4, global deliveries of the X5/X6 series totaled 185,000 units in the first three quarters of 2026.

Compared to previous technical validations and model planning, 46-series large cylindrical cells are now beginning to enter high-end SUV product lines with established market foundations.

For large cylindrical cells, this is more noteworthy than simply adding a new product specification.

In BMW's sixth-generation battery system, the unified diameter of 46mm, combined with different heights such as 95mm and 120mm, can cover the space and energy requirements of various vehicle classes.

Among them, the usable energy per 46120 cell is nearly 30% higher than that of the 4695, enabling the European version of the iX5 battery pack to reach a usable energy capacity of 141kWh.

Unifying cell diameters, reusing core architectures, and adapting to different models through varied specifications and series-parallel designs help reduce the complexity of cross-model development and system integration.

The long-term value of BMW's platform-based approach lies in the ability of a single cell technology to accompany different models into the global market.

Now, the global manufacturing system is catching up.

In October 2025, BMW's Hungarian plant took the lead in launching Gen6 battery mass production. In October 2026, plants in Germany and China followed suit; on November 13, the US Woodruff plant joined in.

According to BMW's plan, by 2030, the Spartanburg plant will produce at least six pure electric models.

Upstream supply chain expansion is proceeding concurrently.

For battery suppliers, the weight of this opportunity has also shifted.

Securing a nomination from an automaker is important, but only by continuously supplying alongside global vehicle platforms can one convert technological advantages into long-term supply partnerships.

10 Million 46120 Cells:A New Milestone in Envision AESC's Mass Production

The advancement of BMW iX5 mass production is already reflected in Envision AESC's delivery data.

GGII Lithium Battery learned that Envision AESC is the exclusive cell supplier for the BMW iX5 outside of China, while also supplying cells for the iX5 model in the Chinese market.

This supply position allows Envision AESC to directly participate in the global mass production of BMW's next-generation high-end SUV.

The collaboration between the two parties has passed several key milestones.

In 2022, Envision AESC entered BMW's Neue Klasse battery supply system; in 2025, the Jiangyin plant began delivering 46120 products; in July 2026, the Jiangyin and Cangzhou plants officially achieved scaled mass production.

By November of this year, cumulative deliveries of 46120 cells exceeded 10 million units.

This figure can be further evaluated from the perspective of complete vehicles.

Based on the estimated cell usage per BMW iX5, 10 million 46120 cells could theoretically meet the cell demand for approximately 10,000 complete vehicles.

Tens of millions of cells do not represent an exceptionally large volume in the overall large cylindrical market. What is noteworthy is that this is a high-nickel silicon-based 46120 cell designed for BMW's high-end mid-to-large SUVs.

It is understood that in addition to equipping the iX5, this product is planned for further application in high-end mid-to-large SUVs such as the iX7.

For Envision AESC, the current milestone of ten million deliveries provides a tangible record of supply, while the expansion of BMW's Neue Klasse models opens up room for future demand.

High-end passenger vehicles have stricter requirements for energy density, fast charging, safety, and long-term reliability. While the 46120 increases single-cell capacity, it also raises the difficulty of scaled manufacturing.

The height of Envision AESC's 46120 cell increased by 25mm, presenting new challenges for winding alignment, welding precision, foreign matter control, and product consistency.

Higher single-cell energy can reduce certain connectors and optimize system integration, but the cost advantage of large cylindrical cells in battery packs ultimately relies on achieving high yields on the cell manufacturing side.

Envision AESC's 46120 cell mass production yield has reached 95%.

Industry insiders point out that 46-series large cylindrical cells can leverage the mature high-speed manufacturing experience of small cylindrical cells, reducing unit manufacturing costs through automation and high-takt-time production. However, the taller design of the 46120 and the high-nickel silicon-based material system impose higher demands on production precision and product consistency.

Envision AESC co-defines cell dimensions with customers during the product development phase, incorporating scaled manufacturing requirements into the design. For longer-specification cells, Envision AESC employs a magnetic levitation high-speed conveying system to reduce the risk of foreign matter caused by mechanical friction; through flying welding processes, high-precision welding is completed while workpieces are in continuous motion.

Regarding product reliability, both parties conducted collaborative design around issues such as heat dissipation, bottom venting, and nickel layer corrosion of steel shells, enhancing the reliability of high-nickel silicon-based cells under conditions such as high temperature, high humidity, and transoceanic transportation.

Quality control permeates the entire manufacturing process. Envision AESC combines long-cycle validation, over 1,000 CCD visual inspection items, and 100% X-ray foreign matter scanning upon cell off-line status to control product defects and consistency risks.

From production takt time to yield rates, and then to long-term reliability, Envision AESC is integrating the product design and manufacturing processes of the 46120.

From the first batch of deliveries in 2025, to dual-base mass production in 2026, and now to cumulative deliveries of ten million units, Envision AESC's 46120 is accumulating bulk supply track records in the high-end passenger vehicle sector.

For 46-series large cylindrical cells, the opportunities brought by BMW are becoming increasingly concrete.

In June of this year, the iX5 was officially launched; in November, the US battery plant started mass production. BMW has integrated 46-series cells into the production system of its global mainline models. The true test now is whether it can achieve stable and economical deliveries at scale.

Envision AESC's delivery of ten million 46120 cells provides a new sample in this round of competition.

The vehicle-side opportunities that large cylindrical cells have waited years for are gradually being realized along with the mass production progress of global automakers.